Electronics, Audio, and Video All Audio, Video, Alarms, and all other electronics

Need Help!!!

Thread Tools
 
Search this Thread
 
Old Feb 28, 2007 | 07:32 PM
  #1  
tremorz's Avatar
Thread Starter
New Member
 
Joined: 05-20-06
Posts: 128
Likes: 0
From: Valley Stream
Need Help!!!

i took out my aftermarket radio and harness and put my stock radio in, the radio powers up and reads stations and watever but im not getting any sound out of the speakers, is it possible to blow or damage an amp without blowing any fuses?

i checked all fuses in the car under the passenger dash and also under the hood, everything is ok.

help!

anybody?

Last edited by tremorz; Feb 28, 2007 at 07:32 PM. Reason: Automerged Doublepost
Reply
Old Feb 28, 2007 | 08:23 PM
  #2  
NP05Cobalt's Avatar
Senior Member
 
Joined: 04-11-06
Posts: 677
Likes: 0
From: Sarasota, FL
i had this same problem... did you cut the factory wireharness?
Reply
Old Feb 28, 2007 | 08:27 PM
  #3  
tremorz's Avatar
Thread Starter
New Member
 
Joined: 05-20-06
Posts: 128
Likes: 0
From: Valley Stream
didnt cut anything, everything was plug and play except for having to run a wire to the amp from the aftermarket head-unit (to keep the amp on with the absense of a stock radio). it was something like a remote wire similar to 1 used for subwoofer amps to turn it on.....i have pretty much come to the conclusion that i damaged my stock interior amp.

any body have any idea how much new stock interior amp is....im positive this isnt under warranty
Reply
Old Mar 1, 2007 | 04:07 AM
  #4  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
not sure where you could buy one... and im more positive that you can get a better aftermarket one
Reply




All times are GMT -4. The time now is 07:03 PM.