Relocated Traction Control Button!
Relocated Traction Control Button!
So, I have been thinking ever since I got the car how horrible the location of the TC button is, its very inconvenient. So I relocated it.... Here's some pics..... Now I just need to figure out I am going to recces the button into the plastic...
But here yah go....
I was gonna do a How To, but its such a simple thing to do.



where it used to be(for those without TC)
But here yah go....
I was gonna do a How To, but its such a simple thing to do.



where it used to be(for those without TC)
Last edited by JsavageSS/TC; May 16, 2009 at 06:10 PM.
ya TCs come with TC i think... possibly in the lil dash trim where our dic controls are ss schgd? lol i was sorta confused too (i was thinking ok where did he relocate it to? i see before and the after pic shows no button.... but i think i figured it out)
try turtle wax polishing compound for the trim, otherwise wet sand it with 2000grit and clear it nice and heavy.
also I noticed you don't have that horrible tan 2 tone like all the other balts, did chevy finally change it to black? or did you paint it?
also I noticed you don't have that horrible tan 2 tone like all the other balts, did chevy finally change it to black? or did you paint it?
I like the idea. But I'd think maybe next to the cig lighter under the HVAC might have been better but thats just me.
The SS and GT's have all black interior. Only two-tone is the door panel inserts and seats but thats on the SS' only.
The SS and GT's have all black interior. Only two-tone is the door panel inserts and seats but thats on the SS' only.
Last edited by 08G5GT2.4L; May 17, 2009 at 12:11 AM. Reason: Automerged Doublepost
not just the Gt's i own the base G5 and its all black, my base balt was tan thou
its inconvenient no matter where it located if you ask me...convenient would of been factory mounted as one of the buttons in the steering wheel. but your location is better than factory thou still, nice job!!
I could relocate it and add something in its place though. Can't go any smaller in size for the switch and its needs the saftey cover for it.
Any suggestions people?



