Electronics, Audio, and Video All Audio, Video, Alarms, and all other electronics

Time for something better!

Thread Tools
 
Search this Thread
 
Old Sep 14, 2008 | 02:34 AM
  #1  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Time for something better!

Still planning my audio. Getting tired of the stock headunit real fast - tired of the four speakers crapping out when I'm listening to it in the 30+ volume ranges. So, it's midnight. I'm bored. I'm looking at ways of spending my money.

So. Does this look half decent?

Pioneer FH-P800BT $459.99
Pioneer TS-W302R $89.99
Pioneer GM-D7400M $289.99

Harnesses, etc.
PAC C2R-GM11 $89.00 + shipping
Metra 40-CR10 $7.99
Metra 95-3302 $8.98 + shipping

I'm heavy on the Pioneer because I'm not sure where else to look - another thing is I'm on kinda a tight budget, being in school and all. I'd get the headunit first, gradually get everything else. I'm not concerned on the installation, that part is easy.

Is there anything better out there for under $700-$750? $1000 seems crazy for this little system. What do you recommend? What are you running? What has the best track record?

Thanks!
Reply
Old Sep 14, 2008 | 02:49 AM
  #2  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
aftermarket pioneer speakers suck... almost as bad as kenwood
Reply
Old Sep 14, 2008 | 02:56 AM
  #3  
Sharkey's Avatar
Senior Member
iTrader: (1)
 
Joined: 10-27-07
Posts: 5,681
Likes: 266
From: Abbotsford BC
pioneer speakers are good but you really need to get into the higher end (read: expensive" stuff to get a good sound.
Reply
Old Sep 14, 2008 | 04:58 AM
  #4  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
only thing thats decent is the PRS and for the price u can get better. pioneer really specializes in the cheapest **** u can find. they are they #1 speaker manufact by volume
Reply
Old Sep 14, 2008 | 01:27 PM
  #5  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Whoah, I didn't know that. What speakers would you recommend?
Reply
Old Sep 14, 2008 | 02:36 PM
  #6  
Spun's Avatar
Senior Member
iTrader: (1)
 
Joined: 12-23-07
Posts: 1,665
Likes: 1
From: Lower Mainland B.C.
Hertz, Focal,
If you got the money try CDT and Morel
Reply
Old Sep 14, 2008 | 02:38 PM
  #7  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Okay, I'll check them out! I'm looking for a sub and amp to begin with - that's where the four speakers start hurting. 'Course, that's after I get the headunit.
Reply
Old Sep 14, 2008 | 02:40 PM
  #8  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
for subs check out re dd fi rockford
Reply
Old Sep 14, 2008 | 04:07 PM
  #9  
Spun's Avatar
Senior Member
iTrader: (1)
 
Joined: 12-23-07
Posts: 1,665
Likes: 1
From: Lower Mainland B.C.
How are those FI's
I havent had a chance to hear them yet but i herd good things about them.
Thats one of the guys from RE, that in on that company right?

How about those SSA's once again havent herd them but I herd there a good sub for a decent price.

Personaly for half the price of a W7 the 2500 series from DD is great sub but I have a biast opinion
Reply
Old Sep 14, 2008 | 06:55 PM
  #10  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
ive only herd the Q (sq model) and its pretty badass. the SSA icon is supposed to be nice but who knows. asked a guy his opinion about the icon vs xxx (he is a real big fan of the xxx) and the response i got was they were similar yet not. sorta vague.

Hey spun where did u originally hear about dd? just wonderin
Reply
Old Sep 14, 2008 | 07:51 PM
  #11  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Alright, did some calling around to the few audio shops around here, found a place that sold Rockford stuff. How does this combo look?

Sub: http://www.rockfordfosgate.com/produ...n_US&p_status=
Amp: http://www.rockfordfosgate.com/produ...status=current

Thanks!
Reply
Old Sep 14, 2008 | 08:43 PM
  #12  
britt's Avatar
Senior Member
 
Joined: 03-09-08
Posts: 698
Likes: 0
From: Lebanon, IN
i have a pioneer HU, 4 infinity reference speakers, and a 300w alpine amp pushing the speakers. sounds great. i would deffinitly recommend infinity speakers. it sounds/feels like i have at least 1 10" sub but i only have 6.5's and 6x9's.
Reply
Old Sep 14, 2008 | 11:25 PM
  #13  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
Originally Posted by Chad92
Alright, did some calling around to the few audio shops around here, found a place that sold Rockford stuff. How does this combo look?

Sub: http://www.rockfordfosgate.com/produ...n_US&p_status=
Amp: http://www.rockfordfosgate.com/produ...status=current

Thanks!
not bad. a lil too much power for the p1 but... You should also see if they do custom boxes. it will make the sub sound much better then a prefab
Reply
Old Sep 14, 2008 | 11:27 PM
  #14  
Spun's Avatar
Senior Member
iTrader: (1)
 
Joined: 12-23-07
Posts: 1,665
Likes: 1
From: Lower Mainland B.C.
Hey spun where did u originally hear about dd? just wonderin
I had only herd of them in passing until I was a member at this site. I do remember seeing them in the IASCA standings (people using them) but couldn't find a local retailer that sold them.

I could not find them on ebay or any internet sales site for that matter, DD is really picky as to who they let carry their product. It was James thread on his install that sold me on them but I still needed to find them.

I went to the car audio place that I had my work done at with the intentions of having 2 10w6's put in but when I got there and saw the DD setup I was happy but was under the impression that they were going to be expensive, when he told me the price I just about choked on my gum, I almost didn't buy them cuz they were so cheap. I always believed in you get what you pay for. This was thhe exception to the rule.

In retrospect it was the smartest thing I could have done, well that and uping to 12's over the 10's (same price so why the hell not) but it was strock of luck finding someone who sells them local, He is the only DD retailer in all of western Canada, the next closest one is 12 hours from here.

On a side note, future plans are to get one more M2 and run them together (master, slave) and upgrade the subs to 9512's, the box sizes are almost the same (within 0.1 cubic feet) I would have to lenthen the port though. Hopefully by next summer, then we'll see if I can hit 150
Reply
Old Sep 14, 2008 | 11:31 PM
  #15  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
lol man errbodys gonna be louder then me
Reply
Old Sep 14, 2008 | 11:51 PM
  #16  
Spun's Avatar
Senior Member
iTrader: (1)
 
Joined: 12-23-07
Posts: 1,665
Likes: 1
From: Lower Mainland B.C.
Oh I bet a months salary that you won't let that happen
Reply
Old Sep 15, 2008 | 01:17 AM
  #17  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
i bet your wrong.... my sealed box is all SQ it just gets loud as **** too
Reply
Old Sep 15, 2008 | 02:01 AM
  #18  
copson20's Avatar
Premium Member
 
Joined: 10-27-07
Posts: 826
Likes: 0
From: Columbia, MO
I prefer DLS midbass and TREO sub, Zapco Amp's but those are $$$$
Reply
Old Sep 15, 2008 | 03:49 AM
  #19  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Originally Posted by EmperorJJ1
not bad. a lil too much power for the p1 but... You should also see if they do custom boxes. it will make the sub sound much better then a prefab
Good to hear. Once I get my paycheck for September (and it's the amount I'm expecting), the headunit will be on it's way into my car. If I want to replace the speakers in the doors, what kind of work is required?
Reply
Old Sep 15, 2008 | 05:37 AM
  #20  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
you would need to pop off the door panels and you need adapters (i have a pair fs fyi) for the 6.5s along with some speaker tabs. the 6X9s are a bit more difficult because the rear deck is a bitch
Reply
Old Sep 15, 2008 | 09:42 AM
  #21  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Hmm, okay. I might be interested in those adapters. I'd need four for my sedan, right? What about the 6x9's in the back? Where can I find the speaker tabs?
Reply
Old Sep 17, 2008 | 11:03 AM
  #22  
-the.k.w.c-'s Avatar
New Member
 
Joined: 03-20-08
Posts: 92
Likes: 0
From: streets
those pioneer subs lick nuts ...get your self a type r or a couple kicker rounds or a single square there not that expensive and u can get some real bass from them .......but u will need a way bigger amp then that pioneer
Reply
Old Sep 17, 2008 | 08:12 PM
  #23  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
Originally Posted by -the.k.w.c-
those pioneer subs lick nuts ...get your self a type r or a couple kicker rounds or a single square there not that expensive and u can get some real bass from them .......but u will need a way bigger amp then that pioneer
Check my post two above this one. What do you think of them?
Reply
Old Sep 18, 2008 | 03:04 AM
  #24  
EmperorJJ1's Avatar
Senior Member
iTrader: (5)
 
Joined: 09-03-06
Posts: 19,376
Likes: 32
From: OR
Originally Posted by Chad92
Hmm, okay. I might be interested in those adapters. I'd need four for my sedan, right? What about the 6x9's in the back? Where can I find the speaker tabs?
nah u only need the front two. if u get the adapters ill throw some in there for ya... if not you should be able to get them at autozone or pep boys or something like that (expensive thou)
Reply
Old Sep 18, 2008 | 09:20 AM
  #25  
Chad92's Avatar
Thread Starter
Senior Member
 
Joined: 06-20-08
Posts: 1,114
Likes: 0
From: Edmonton, AB
I think I'm interested in your offer. What are you asking?
Reply



All times are GMT -4. The time now is 03:53 PM.