Turbo86 June FCOTM Submission
Turbo86 June FCOTM Submission
Name: Jason Bozeman
Location: Paducah, KY ( West KY ; )
Car Info: 2009 Chevrolet Cobalt SS Sedan (1 of 474)
Stock Options: Imperial Blue Metalic, No Sunroof
Modifications
Performance:
K&N Typhoon SRI
Injen IC piping
NGK Laser Iridium Plugs 1 step colder
Trifecta Switch/Hideable Tune 23psi
Muffler Delete w/ Flowmaster Stainless 4inch tailpipe
Supension/Drivetrain:
Pedders Springs
Falken Azenis rt-615k
Visual:
Tinted Windows
Metal Shorty Antenna
Refinished stock Wheels - Graphite
Refinished Brakes in Iron Coat ceramic paint w/ larger HR Brembo decals
Future Plans:
Down-Pipe
Retune
Snail Size Upgrade
Notables:
Won local car show in "Best Domestic" class
Took 1st place in 2 SCCA santioned AutoXs
Pulled a E46 M3
2009 Cobalt SS Sedan - AutoX Tire Spinin - YouTube









Location: Paducah, KY ( West KY ; )
Car Info: 2009 Chevrolet Cobalt SS Sedan (1 of 474)
Stock Options: Imperial Blue Metalic, No Sunroof
Modifications
Performance:
K&N Typhoon SRI
Injen IC piping
NGK Laser Iridium Plugs 1 step colder
Trifecta Switch/Hideable Tune 23psi
Muffler Delete w/ Flowmaster Stainless 4inch tailpipe
Supension/Drivetrain:
Pedders Springs
Falken Azenis rt-615k
Visual:
Tinted Windows
Metal Shorty Antenna
Refinished stock Wheels - Graphite
Refinished Brakes in Iron Coat ceramic paint w/ larger HR Brembo decals
Future Plans:
Down-Pipe
Retune
Snail Size Upgrade
Notables:
Won local car show in "Best Domestic" class
Took 1st place in 2 SCCA santioned AutoXs
Pulled a E46 M3

2009 Cobalt SS Sedan - AutoX Tire Spinin - YouTube









Last edited by turbo86; May 28, 2012 at 06:43 PM.
BREMBO Silver 5" 12.6cm decals stickers brakes sticker | eBay
Thanks boosted06ss! Went to a car show last night up town, had to answer a lot of questions like:
1. So you took the motor out of a coupe and made this in to a SS?
2. What car is this? Cobalt?
3. How much HP this car make, followed by No Way.
I had to educate people all night long.... lol
1. So you took the motor out of a coupe and made this in to a SS?
2. What car is this? Cobalt?
3. How much HP this car make, followed by No Way.
I had to educate people all night long.... lol
god i love that color!!! i have a couple questions for you. 1) did you use some kind of spray paint for the calipers? or a legit gun/booth? ive been thinking of going a different color with my brembos and am curious. 2) was it a pain in the ass getting the original 'brembo' sticker off?
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
no homo either lol
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
no homo either lol
god i love that color!!! i have a couple questions for you. 1) did you use some kind of spray paint for the calipers? or a legit gun/booth? ive been thinking of going a different color with my brembos and am curious. 2) was it a pain in the ass getting the original 'brembo' sticker off?
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
no homo either lol
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
no homo either lol
Car looks great btw, an nice video
ahhh ic i was looking at mine yesterday and drug my nail over it and felt an edge,i thought it was a sticker lol
lol i didnt try peeling it cause i havent figured out which color combo im going to go. since i will be doing it professionally my buddy will probably just sand it out.
good thing i said something,i prolly woulda been trying to peel for dayssssss
good thing i said something,i prolly woulda been trying to peel for dayssssss
god i love that color!!! i have a couple questions for you. 1) did you use some kind of spray paint for the calipers? or a legit gun/booth? ive been thinking of going a different color with my brembos and am curious. 2) was it a pain in the ass getting the original 'brembo' sticker off?
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
man,i really love the color of your sedan and the wheel color you chose,very good looking!!!
As for your questions:
I used VHT Cermaic spray paint (cast iron coat). As said before, the original brembo stamp is not a sticker. Here is the process i followed. Painting is all about prep. First, cleaned the calipers with brake cleaner, then used a brush with soapy water, until all brake dust build-up is removed. Then dried it good, then taped everything off. I did not remove the original stamp. I sprayed two coats of paint. The key to spray paint is taking your time and not getting in a rush, which causes runs. After the paint has dried for atleast 30 minutes, you can apply the decal. After decal is on, you can then start spraying a coat of VHT Ceramic Clear-Coat paint. I did 3 coats of this, 20 minutes between coats. This locks the decal in. Hope that helps.
As for the AutoX question. I could run SMF, but I am still legal for DSP. I usually run in whichever class has the most competition.
The video took a little bit of time, but I enjoy doing stuff like that.
Thanks! I love the color too, but when i was looking for a TC Sedan, the car almost chooses you, as it was the closest one to me at 400 miles away.... lol... I love it tho.
As for your questions:
I used VHT Cermaic spray paint (cast iron coat). As said before, the original brembo stamp is not a sticker. Here is the process i followed. Painting is all about prep. First, cleaned the calipers with brake cleaner, then used a brush with soapy water, until all brake dust build-up is removed. Then dried it good, then taped everything off. I did not remove the original stamp. I sprayed two coats of paint. The key to spray paint is taking your time and not getting in a rush, which causes runs. After the paint has dried for atleast 30 minutes, you can apply the decal. After decal is on, you can then start spraying a coat of VHT Ceramic Clear-Coat paint. I did 3 coats of this, 20 minutes between coats. This locks the decal in. Hope that helps.
As for the AutoX question. I could run SMF, but I am still legal for DSP. I usually run in whichever class has the most competition.
The video took a little bit of time, but I enjoy doing stuff like that.
As for your questions:
I used VHT Cermaic spray paint (cast iron coat). As said before, the original brembo stamp is not a sticker. Here is the process i followed. Painting is all about prep. First, cleaned the calipers with brake cleaner, then used a brush with soapy water, until all brake dust build-up is removed. Then dried it good, then taped everything off. I did not remove the original stamp. I sprayed two coats of paint. The key to spray paint is taking your time and not getting in a rush, which causes runs. After the paint has dried for atleast 30 minutes, you can apply the decal. After decal is on, you can then start spraying a coat of VHT Ceramic Clear-Coat paint. I did 3 coats of this, 20 minutes between coats. This locks the decal in. Hope that helps.
As for the AutoX question. I could run SMF, but I am still legal for DSP. I usually run in whichever class has the most competition.
The video took a little bit of time, but I enjoy doing stuff like that.
pretty true. i layed eyes on my sedan and that was it. next day i was driving her home.
i wish i had a sunroof though lol i like in the video when you roll smoke too lol
thanks for the tips. i appreciate it man!
sedans FTW!!!
They are on now. MadCity forgot to send them to me when he sent the wheels, but I have them on now, unfortunately when I had the first pics taken, I didn't have them yet. If you look at the autox pic, you will see them on.
@Rob - No Prob!
@FryLoch - Thanks, these cars love the twisties!
@Rob - No Prob!
@FryLoch - Thanks, these cars love the twisties!


