2.0L Ecotec gets a boost from GM Performance Parts' Stage Kits
<img src="https://www.cobaltss.net/articles/stage2.jpg" align="left" border="0" hspace="5" vspace="5">Performance upgrade kits for Chevy Cobalt Coupe SS Supercharged; Saturn ION Redline
MSRP - Stage One Kit - $500; Stage Two Kit - $750 DETROIT - GM Performance Parts is adding some extra juice to the already high-voltage 2.0L Ecotec-powered Chevrolet Cobalt Coupe SS Supercharged and Saturn ION Redline by introducing two supercharger kits that generate real power gain at the wheels. The Stage One and Stage Two performance upgrade kits provide an additional 31 and 36 hp respectively. "These stage kits are aimed squarely at the hard core enthusiast looking to boost the power of the already charged-up 205-horsepower 2.0L Ecotec engine of the Chevy Cobalt Coupe SS Supercharged and Saturn ION Redline," said Nancy Philippart, executive director, GM Accessories. "They deliver increased horsepower and torque throughout the operating range of the engine." The Stage One Kit (P/N 17801947) with a manufacturer's suggested retail price (MSRP) of $500.00, includes higher-flow fuel injectors and an ECU calibration to provide a 31 hp boost to the Cobalt Coupe SS Supercharged and ION Redline Ecotec engine for a total of 236 hp and 205 lb.-ft. of torque. The Stage Two Kit (P/N 17803229), with an MSRP of $750.00, yields more power through the middle section of the power curve versus the Stage One Kit. The Stage Two Kit includes the parts available in the Stage One Kit and adds a smaller supercharger pulley and drive belt, pushing the engine alive with 241 hp and 218 lb.-ft. of torque across a broad engine speed range. A Stage One to Stage Two Upgrade Kit (P/N 17803230) is also available for an ION Redline or Cobalt Coupe SS Supercharged with a Stage One performance upgrade kit already installed. This kit converts the Stage One to Stage Two, increasing performance from 236 hp to 241 hp and has an MSRP of $400.00. "The kits are easy to install and conform to all GM engineering and validation standards for the Cobalt and ION," said Philippart. "And, best of all, they're backed by GM." The Stage One and Stage Two Kits fit 2005-2006 Saturn ION Redline and Chevrolet Cobalt Coupe SS Supercharged models only, require premium fuel, and are available through all GM dealerships. GM Accessories and GM Performance Parts are sold in North America by Chevrolet, Buick, Pontiac, Cadillac, GMC, Saturn, Saab and HUMMER dealerships. For more information about GM Parts, GM Accessories or GM Performance Parts, visit www.gmgoodwrench.com. Please Read the FAQ on these kits and search the site :cssNET: |
I know we have a ton of threads on this, but we needed the official release on the front page :)
Please do a search on the topic :cssNET: |
if msrp is 750 for stage 2...y is everyone getting it for cheaper like a hundred dollars cheaper.
|
Originally Posted by VictoryRed06
if msrp is 750 for stage 2...y is everyone getting it for cheaper like a hundred dollars cheaper.
|
I love how going from a 3.5 ish pulley to a 3.0 ish pulley only yeilds 5 hp.
|
Well didn't someone say that stage 2 actually produced 260? That's more than a 36 hp gain. Time will tell though when people start dynoing their cars.
|
The way I see it. ALL THEORICTICAL and estimated.
Stage 1 = 236 hp Stage 2 = 1 tenth decrease in pulley size = close to 1 psi increase. 1psi = around 8 hp. Going from a pulley that is 3.4 inches (guess) to a 77.9 mm = 3.07 inchs (3.1), so a 3 psi increase X 8hp = 24 hp increase + 236 hp = 260 HP. Thats the hope anyways. Today at around 5 pm we should find out! |
Part number for stage 2 does not come up on GM Performance parts site when plugged into the parts search # :thumbsdow
|
No it doesn't comeup on there website but it is in the new gm power book your local dealer should have one. If not you can order them there lik 6 bucks
|
what u guys think ya can get a stg 1 for. I wanna get stg 1, then GO INTENSE stg 3. ha = stg 4?? j/k
|
I wonder what a stage 1 with 2.8 inch pulley would dyno....
|
the 1 to 2 upgrade is $400 for a pulley and belt, LOL
|
New Cobalts with Stage 2 kit installed from dealer!!!!!
Crest Chevrolet in Jacksonville, FL is selling '06 SS Cobalts with the Stage 2 Kit installed!!!
Contact me, Eric Wesch, for details... EricWesch@CrestChevrolet.com We are also thinking about setting these cars up, at the dealership, for club racing (SCCA). Immagine going to the dealership, picking out your color, desired HP level and/or desired competition class, and finance it all. Drop me some feedback at the above email address and let me know what you think. I have Dealership backing, all I need are buyers!!!! |
as i impatiently sit in my office until 5pm , my car is sitting at my local dealer with stage 1 INSTALLED...which completes my stage 2 since i have a ZZP 3.0 on with tensioner and hope to dyno within the next week....Hoping for something like 260-270 would be more realistic consider a 3.0 pulley is crankin 225-235
|
at what rpm is the rev limiter set after installing the kit?
|
Stage 1 and 2 kits
Does GM really warranty this add on. I have read that they have to reflash your ECM but I wonder if they will put up a fight for any warranty work on the engine or drivetrain in the future if any problems may arise. Anybody have any info on this....
:nono: |
Originally Posted by p7x
I love how going from a 3.5 ish pulley to a 3.0 ish pulley only yeilds 5 hp.
|
Originally Posted by p7x
I love how going from a 3.5 ish pulley to a 3.0 ish pulley only yeilds 5 hp.
can you say..... U.N.D.E.R R.A.T.E.D |
where about could i find a stage two kit for the cobalt here in edmonton alberta canada.
|
Anybody know the flow rates of the upgraded injectors?
|
Stage 2 Kits DO NOT void warranty...
If it is dealer installed and GM parts (pulley and all) it will not void any warranties. But... that is only up to stage 2, there has been no release on the stage 3 as of now.
|
Originally Posted by 06' SS2SS
Anybody know the flow rates of the upgraded injectors?
|
Prices$$ n info!
I just called 2 dealerships out here in MN, and they both quoted me at $650 for the Stage II.....you can put the parts in yourself but you have to take it back to GM to reflash the puter! HELLZ YES on that boyz!!
Then after you get the GM Stage II in, you can buy the INTENSE Interchange Pulley (or whoevers), and swap it out whenever! Then you don't have to buy the tensioner and there injectors n such, and your puter shouldn't need the AFC controller, or least shouldn't need to be tweaked as much! Everything but the pulley will be GM Certified Parts then, and they won't bitch at ya when needs to get fixed, if it does! Or when the engine reaches the 60k or 100k dependin' on your warrenty have them program it to the Stage III when it comes out for even more fun!! otherwise it voids your warrenty b4 that! :twothumbs |
Be Carefull...
We mark the pulley with a sealant. If the pulley is tampered with, the warranty is voided. We won't fix a blown engine because someone put a tiny pulley on, overboosted, then switched back. :nono:
|
So what size is the pulley that they use for Stage 2?
|
All times are GMT -4. The time now is 11:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands