LED for halo
guys I know I'm probably a pain in the ass with all these questions about the projectors, but hey isn't that what forums are for??? anyway...i'm wondering what type of LEDs are in the halos? These are the 1st gen projectors and I have everything hooked up, triple checked my wiring and I still have only one halo working (passenger side high beam) and one set of LEDs (driver's side)...rather than trying to deal with the ebay company on returns and shit (having to pay for shipping to send back) I would like to just replace the LEDs and relays myself. I figure I can just go to radio shack and get all the parts i need for under $50, I just need to know what kind (size, voltage, what am I looking for???). Also am I getting myself into a project that is gonna be a huge PITA??
bump for some help? |
bump for the daytime crew....can anyone help me out?
|
Ya they are those little pains in the ass, the leds touch the headlight housing shorting them out.. i just got so fed up with it so i just bought the CCFL projectors, never been happier with my headlights
|
I suggest wrapping the little LED's in electrical tape starting just from over the base of the bulb (but not enough to block light) and about an inch or so down the wires. Otherwise just about anything kills them.
|
are there different kinds of LEDs though? I want to go to radioshack today and see if I can get replacements, but I don't want to pull the whole headlight apart just to check the halo LED
|
i believe they are 194 on the 1st gens
|
Yup, 194 FTW...
You can get the LED's for about $1/each and the relay for about $5, and then maybe another $10 for wire (that crap is expensive). |
Originally Posted by denlou
(Post 2112206)
Yup, 194 FTW...
You can get the LED's for about $1/each and the relay for about $5, and then maybe another $10 for wire (that crap is expensive). |
www.blackbalt.com halo leds are 3mm and the top 3 are oval.
|
Originally Posted by slvrcobaltscss
(Post 2112396)
is there a specific relay I need? and that 194 is the same for the halo and LEDs above the projector? I'm at the mall now, ready to go to Radio Shack, haha and I didn't bring the car (nice day to be on the bike) so I have nothing to reference
|
hey thanks a lot guys, def a big help
|
All times are GMT -4. The time now is 07:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands