LED for halo
#1
Member
Thread Starter
Join Date: 09-16-06
Location: Lehigh Valley, PA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
LED for halo
guys I know I'm probably a pain in the ass with all these questions about the projectors, but hey isn't that what forums are for??? anyway...i'm wondering what type of LEDs are in the halos? These are the 1st gen projectors and I have everything hooked up, triple checked my wiring and I still have only one halo working (passenger side high beam) and one set of LEDs (driver's side)...rather than trying to deal with the ebay company on returns and **** (having to pay for shipping to send back) I would like to just replace the LEDs and relays myself. I figure I can just go to radio shack and get all the parts i need for under $50, I just need to know what kind (size, voltage, what am I looking for???). Also am I getting myself into a project that is gonna be a huge PITA??
bump for some help?
bump for some help?
Last edited by slvrcobaltscss; 03-24-2008 at 12:47 AM. Reason: Automerged Doublepost
#3
Senior Member
Join Date: 06-12-06
Location: Surrey, B.C.
Posts: 2,458
Likes: 0
Received 0 Likes
on
0 Posts
Ya they are those little pains in the ass, the leds touch the headlight housing shorting them out.. i just got so fed up with it so i just bought the CCFL projectors, never been happier with my headlights
#4
Senior Member
Join Date: 12-06-06
Location: Saskatoon, SK
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
I suggest wrapping the little LED's in electrical tape starting just from over the base of the bulb (but not enough to block light) and about an inch or so down the wires. Otherwise just about anything kills them.
#5
Member
Thread Starter
Join Date: 09-16-06
Location: Lehigh Valley, PA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
are there different kinds of LEDs though? I want to go to radioshack today and see if I can get replacements, but I don't want to pull the whole headlight apart just to check the halo LED
#8
Member
Thread Starter
Join Date: 09-16-06
Location: Lehigh Valley, PA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
is there a specific relay I need? and that 194 is the same for the halo and LEDs above the projector? I'm at the mall now, ready to go to Radio Shack, haha and I didn't bring the car (nice day to be on the bike) so I have nothing to reference
#10
Senior Member
Join Date: 12-06-06
Location: Saskatoon, SK
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post