when using heet for your meth mixture, do u just use water to get a good 70/30 mixture or do u mix it with -20* windsheild washer fluid? i normally just buy the stuff pre mixed but im tired of spending all that money and im trying to get some meth before i go to the track tomorrow

 

i made mine using heet and 0 deg washer fluid (the best they have here in tx)
0 degree = 20% meth.
adding heet for every gallon of windshielf washer fluid = 10% extra meth.
so when here in texas i bought the o degrees.
so i needed 3 heets to make 50 percent meth mix.

i called up AIS for that info.
1-801-447-ALKY (2559)

just told them i had just bought their kit and was trying to make my own meth, and they gave me that info.

 

find a race shop, and buy methanol.

 

Well I cleaned carquest out of heet (yellow bottle) and bought -20 washer fluid, I heard 2 bottles of heat to a bottle of the washer fuild -20 gives u 50/50... And no one around here sells premixed meth

 

sounds about right to me.
if 0 deg takes 3 to get to 50/50

 

Bump. My meth kit should arrive on Tuesday N i have no idea what to for meth or how to make my own?

 

you buy methanol. you buy distilled water. you dilute as desired.

 

but it is very hard to find methanol...

 

Oh my ******* god this site is a piece of ****. Takes 30 minutes to post a god dammed response.

1 Yellow bottle of heet to a gallon of distilled water gives you ~10% meth mix.

 

if there are race tracks and/or race shops there, there is meth.

 

Yup.

Race shops all over have methanol.

I think you can get meth at any speed shop.