Appearance: How To: Change Fog Light Bulbs
Thread Starter
Senior Member
Joined: 03-01-06
Posts: 6,088
Likes: 1
From: Westchester, New York
The fog light bulbs are H11, I bought me some NOKYA 9007 (http://www.tntautosport.com/index.ph...roducts_id=126) as well as some of the H11's (if your interested, call me to place the order).
I didnt install the fogs, cuz I wasnt sure how to.
Read this, and immediately went out and did it.
Was a 10min job.
Great How To! and it was so simple to turn the knob to release the fogs (unlike the headlights which take a little effort)
+rep
I didnt install the fogs, cuz I wasnt sure how to.
Read this, and immediately went out and did it.
Was a 10min job.
Great How To! and it was so simple to turn the knob to release the fogs (unlike the headlights which take a little effort)
+rep
Thread Starter
Senior Member
Joined: 03-01-06
Posts: 6,088
Likes: 1
From: Westchester, New York
that looks sick, imma have to get a pic of mine up here, i brought the car to the club last night and everyones heads turned, then i got into a race, this kid in a maxima something tried flying by, so i caught up we stopped at a light he took off so i eased first so no wheel hop once i got second i floored it caught him and then pulled like 5-6 cars, then shut down at 110 due to a hill ahead so didnt wanna go fast over that, later finding a sheriff making a u turn and he was way back so i pressed the gas some more pulled into a gas station and he went by haha im slick, but then yeah that was my night but besides that, i need to take pics maybe tonight
Senior Member
Joined: 04-09-06
Posts: 656
Likes: 1
From: Quebec, Canada
I changed them today, just a FYI
on the 2.4's on the left side the access to the fog is blocked by the resonator so you have to go from the fender, the other side is fine though, and it's much easier from above than from the fender IMO!
good how to!
on the 2.4's on the left side the access to the fog is blocked by the resonator so you have to go from the fender, the other side is fine though, and it's much easier from above than from the fender IMO!
good how to!
Thread Starter
Senior Member
Joined: 03-01-06
Posts: 6,088
Likes: 1
From: Westchester, New York
i found out another way for everyone to do this but u gotta have somewhat skinny arms like i do, go into your lower grill location lift up the plastic inside and then go underneath that reach in twist the bulb out and then bring it out where u r and then change them, i did it no problem just gotta figure out where the bulb goes back after, soon im doing HID's 3000K in my fogs, and im ordering new headlight HID's
I got to step 5 and didnt know wtf i was looking at. I have a TC and started on the driver side. It was kinda tight to reach down in there. That whole big housing twists to take bulb out? or do I have to twist that harness in the back? I tried moving **** and saw there was a little metal pole sticking out and was like..umm, what the hell is going on. And becasue of the tight space I figured id ask for more elaboration on step 5 b4 I just start twisting ****.
Senior Member
Joined: 05-12-08
Posts: 998
Likes: 0
From: Rochester NY
Hmm, I just came across this thread. I changed mine from underneath the car. 3 little bolts on each side underneath the fogs, and you can pry out the little splash guard. Took me 2 minutes a side. But the headlight thing would work too if you can't get underneath.
you are retarded if you take your headlights out to change a fog light.. the fender well is 3 8 mm bolts on each side, no jacking the car up. When you need to get to it just turn the wheel in whichever direction you need to get access to it... Took me seven and one half minutes to do both
Senior Member
Joined: 08-05-06
Posts: 1,552
Likes: 0
From: long island
you are retarded if you take your headlights out to change a fog light.. the fender well is 3 8 mm bolts on each side, no jacking the car up. When you need to get to it just turn the wheel in whichever direction you need to get access to it... Took me seven and one half minutes to do both
