H11 12,000k kit Bought From GroupBuy Sale! - HIDWerks.com

Tools Required:
-------------------
10mm Socket
Socket Wrench
3/4 Extension

Step 1: Remove the 4 top bolts that hold the headlights and bracket in place & the 3 Push clips on the grill.



Step 2: Pull headlight out from the outside as shown. Takes some wiggling but it will come out



Step 3: Remove the 2 lower bolts that hold the bracket in place.



Step 4: Remove the headlight bracket by wiggling it out.



Step 5: Unplug the horn by squeezing the plug. Push wire to the side. This makes it easier to install the bulb and less chance of it hitting or catching on something.



Step 6: Mount your ballast. I already have a headlight kit so i mounted it on the inside of the bumper with some 3M Double sided tape. Make sure to clean the area before hand. For people in the colder states use a hair dryer to heat up the area before hand so the tape sticks. Ive had mine mounted for 1+ Years without issue and its still mounted.



Step 7: Wiring up your HID Kit. Its completely plug-n-play. Follow the picture before for where the plugs go. When plugging into the ballast. Clips on the plug go over the smaller bump on the ballast. If it does not work reverse it. When installing the bulb, **Be VERY CAREFUL** not to hit the bulb on the foglight and be very gentle when aligning it up before twisting it into the slots.




Finshed Product: 12,000k Bulbs

 

Approved.

 

looks pretty badass
what kinda hids are you running for your headlights?

 

very nice how-to!

 

nice write up ill be doing this soon

 

sub'd

 

Sub'd

 

Nice write up man.

Oh btw last week was pretty busy so I didn't get a chance to mail that package until yesterday. Point is you should have mail in the next day or so.

 

looks amazing. i thought it was harder than that. good write up

 

cute. ill be doing hids in fogs soon

 

ugh i want a bumper from Schram auto parts.
but where would i get a full foglight kit that would be proper
the bumper is only like 300 or so i just dont know where i would get foglight harness and setup

 

nice how to props

 

sub'd

 

pretty sweet i might get this whenever i get the money

 

How I wish I had foglights

 

great job, i want to do this now

 

Looks insane
any pix of a front shot???

 

 

I'll be installing some 6k HIDs this week

How can you run just the turn signals and fogs in the Cobalt? Stupid question but i just got mine

 

no battery relay?

 

Nice i like it

 

Just press the fog light button. Worked for me even before I pulled the drl fuse.

 

Mines the blue

 

Do you need a relay harness for the foglights?

 

No but its recommended. We have them on sale. www.BuyHIDs.com