need some good advice
#1
Member
Thread Starter
Join Date: 08-17-07
Location: Gainesville, Florida
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
need some good advice
Hey guys...need a quick word of advice from the experts here. I'm running 60s a 2.8" full 3inch dp and such need to know the best kit out there for my setup whether its wet or dry any advice will help. Just need pointed in the right direction for what to buy here thank yall
#2
Senior Member
Join Date: 09-28-06
Location: Anderson, SC
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
everyone will probably tell ya wet is the safest way to go since you dont have to get it tuned it accounts for the fuel needed but thats just what ive learned from reading threads on here
#3
Member
Thread Starter
Join Date: 08-17-07
Location: Gainesville, Florida
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Cool anyone give me a link to the right kit I should get in there opinion bc I know we have the electronic throttle
#4
Member
Join Date: 10-16-08
Location: Langley BC Canada
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zex.com/Pages/129/Wet%204...0Cylinder.aspx
This is the system I run. You just have to put an 82k 1/2 watt resistor in the line to the TPS due to the drive by wire
This is the system I run. You just have to put an 82k 1/2 watt resistor in the line to the TPS due to the drive by wire
#5
Member
Thread Starter
Join Date: 08-17-07
Location: Gainesville, Florida
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zex.com/Pages/129/Wet%204...0Cylinder.aspx
This is the system I run. You just have to put an 82k 1/2 watt resistor in the line to the TPS due to the drive by wire
This is the system I run. You just have to put an 82k 1/2 watt resistor in the line to the TPS due to the drive by wire
Thread
Thread Starter
Forum
Replies
Last Post