Minnesota Balts
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
Just FYI tyg - my sig is somewhat, well, sarcastic - you sound like you're in the same boat as I was, looking at mods already - soon after buying it! If you're looking for Stg2, I myself wouldn't go through the dealer, just get GMPP parts from CED (Crate Engine Depot) although it sounds as if there's a backorder on it... my dealer quoted me over $1100 for Stg2 + installation.
Oh yea, was anyone on here driving north on 35W/65 (before downtown Mlps) in a red LS or LT, low pro wing, with a passenger this past Saturday around 5-6pm? I was headed to a reception in downtown Mlps and found myself driving next to them. Just curious. That was me in the silver... PS - NO stickers/decals on mine..
Oh yea, was anyone on here driving north on 35W/65 (before downtown Mlps) in a red LS or LT, low pro wing, with a passenger this past Saturday around 5-6pm? I was headed to a reception in downtown Mlps and found myself driving next to them. Just curious. That was me in the silver... PS - NO stickers/decals on mine..
and to add to your 2nd part. if you're downtown quite a bit.. keep your eyes open for the black ss/sc, fully upgraded from intake to exahust and everything between... including 20" spinners (just working on my sarcasim, how am i doing?) but yeah i'm down there quite a bit...
Senior Member
Joined: 06-28-06
Posts: 6,651
Likes: 0
From: Rochester, mn
Senior Member
Joined: 12-12-06
Posts: 2,904
Likes: 2
From: minnesota
using the money from the bike on my car so i can finally get what Ive been wanting for a long time now 
bc3tech u going to make it to the meet on the 7th? rep the procharger for smp then 
Banned
Joined: 03-08-07
Posts: 80
Likes: 0
From: Shoreview, MN
so you bought it drove it what like once and now your selling it... wow! I'm I probably wont go to the meet but we'll see.
Member
Joined: 08-16-06
Posts: 318
Likes: 0
From: Minnesota
haha, well you got me on the sarcasm. lol. yeah i'm total stock.. but went to the dealer yesterday and he quoted me 200-300 for installation and said he could get the stage2 for 650 (then i told him i could find it cheaper and then he buckled and told me his price was 550) but the install is only 2-3 hour work at a dealer... we'll have to see.
and to add to your 2nd part. if you're downtown quite a bit.. keep your eyes open for the black ss/sc, fully upgraded from intake to exahust and everything between... including 20" spinners (just working on my sarcasim, how am i doing?) but yeah i'm down there quite a bit...
and to add to your 2nd part. if you're downtown quite a bit.. keep your eyes open for the black ss/sc, fully upgraded from intake to exahust and everything between... including 20" spinners (just working on my sarcasim, how am i doing?) but yeah i'm down there quite a bit...
had a reception at the USBank bldg at the Atlas Bar & Grill... and then proceeded to get lost trying to get out of downtown Mlps... long story... I hate downtown Mlps...
On another note, I got some of those Zex plugs and IMHO the car runs MUCH, MUCH smoother - just FYI for all of ya w/SSSC, you may want to try a set
Senior Member
Joined: 12-12-06
Posts: 2,904
Likes: 2
From: minnesota
Senior Member
Joined: 06-28-06
Posts: 6,651
Likes: 0
From: Rochester, mn
Stg2 = 2 hours install (according to dealer install book, hold them to it)
had a reception at the USBank bldg at the Atlas Bar & Grill... and then proceeded to get lost trying to get out of downtown Mlps... long story... I hate downtown Mlps...
On another note, I got some of those Zex plugs and IMHO the car runs MUCH, MUCH smoother - just FYI for all of ya w/SSSC, you may want to try a set
had a reception at the USBank bldg at the Atlas Bar & Grill... and then proceeded to get lost trying to get out of downtown Mlps... long story... I hate downtown Mlps...
On another note, I got some of those Zex plugs and IMHO the car runs MUCH, MUCH smoother - just FYI for all of ya w/SSSC, you may want to try a set
sorry, i had to do it because i saw and individual with an sc totally rip on us 2.4's for no apparent reason.
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
Stg2 = 2 hours install (according to dealer install book, hold them to it)
had a reception at the USBank bldg at the Atlas Bar & Grill... and then proceeded to get lost trying to get out of downtown Mlps... long story... I hate downtown Mlps...
On another note, I got some of those Zex plugs and IMHO the car runs MUCH, MUCH smoother - just FYI for all of ya w/SSSC, you may want to try a set
had a reception at the USBank bldg at the Atlas Bar & Grill... and then proceeded to get lost trying to get out of downtown Mlps... long story... I hate downtown Mlps...
On another note, I got some of those Zex plugs and IMHO the car runs MUCH, MUCH smoother - just FYI for all of ya w/SSSC, you may want to try a set
Mlps ALWAYS tends to produce long stories... lol. i, however, LOVE to drive down there. something about the lights off the wax. ha.
Member
Joined: 06-26-06
Posts: 329
Likes: 0
From: roseville, minnesota
my stage 2 kit finally arrived. I will be getting it installed tomorrow! Booooo for gm backorders. This weekend i will get my strut tower bar installed and my ingalls torque dampener. 3 mods in one week... I hope this doesnt turn into an addiction.
07 SS/SC w/LSD
Sunburst Orange Metallic
07 SS/SC w/LSD
Sunburst Orange Metallic
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
my stage 2 kit finally arrived. I will be getting it installed tomorrow! Booooo for gm backorders. This weekend i will get my strut tower bar installed and my ingalls torque dampener. 3 mods in one week... I hope this doesnt turn into an addiction.
07 SS/SC w/LSD
Sunburst Orange Metallic
07 SS/SC w/LSD
Sunburst Orange Metallic
oh and the addiction thing... haha... i'm SURE it will. haha. i'm with porter on this one. aint it great?
:
Member
Joined: 08-16-06
Posts: 318
Likes: 0
From: Minnesota
the CED GMPP products can't be refused (for warranty purposes) by the dealer as long as they install it, as they're certified GM parts - Stg2, GMPP Header and GMPP Touring catback installed by mine @ $80/hr - warranty honored (however it was their first time, special huh? - so it took them more like 7 hours, but only charged for 4)
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
the CED GMPP products can't be refused (for warranty purposes) by the dealer as long as they install it, as they're certified GM parts - Stg2, GMPP Header and GMPP Touring catback installed by mine @ $80/hr - warranty honored (however it was their first time, special huh? - so it took them more like 7 hours, but only charged for 4)
Member
Joined: 08-16-06
Posts: 318
Likes: 0
From: Minnesota
k cool so if i buy from cobaltaddiction or somewhere and bring in the GMPP parts they are supposed to be able to accept them? cause the dude i talked to was shaking his head and said "that would be like bringing your eggs into perkins and saying, can you cook these?" haha i thought it was funny and didn't have a good comeback cause i didn't know. but this is way up north in the sticks, so i might be better off checking with a city dealer anyway...
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
yeah i'll have to look into anyone around these parts getting the stg2 and how they did it...
Member
Joined: 06-26-06
Posts: 329
Likes: 0
From: roseville, minnesota
I just ordered it from the dealer. My brother works at the dealer so i got a decent price on the kit.
New Member
Joined: 03-16-07
Posts: 124
Likes: 0
From: MN
nice brother. haha. the roseville dealer or no? i went there to look for the cobalt when i was looking to buy and the salesman was pretty short with me cause of the age factor... he "attempted" to locate one and said there wasn't one within 500 miles... but went to another dealer and had no probs at all... weird huh? but yeah when i go i think i'll check out to see who has done one before so it's not a first time deal for the shop.. keep it easy ya know?
Senior Member
Joined: 07-27-06
Posts: 1,113
Likes: 0
From: Brooklyn Park, MN
^^I had mine installed at friendly chev in Fridley. If you bargain with them, the will charge you for 2.5 hours ($300). Yea it sucks, but they did a good job. Just make sure you don't do it on a weekend as they can't get the codes for the ECU flash. I guess GM HQ that handles that stuff is off on weekends.