PRND3L

Ill be at Oscars with some BCM guys.

07cobaltguy

Thatswere i was planing on sitting.

XD40_Bang!

If I get my new motor in the car, which I will.. you may see me.

cobaltguy889

LI'LL be there tomorrow, I planned on going to oscars as well

XD40_Bang!

I'm going to start bright an early on my car I'm planning on being done my 4 at the latest. Lord willing.

stealthy1ss

iTrader: (1)

Ran the truck at GLD last night. I should bracket race this thing. All three times down the track were 16.2 @ 82. I was just glad that it wasn't the slowest thing on the track.

I need to talk with you reguarding your charge piping.

cobaltguy889

Sure, you going to be out at hwy?

Otherwise, You got my number, give me a ring when you get chance.

XD40_Bang!

That's right ******* I took the motor out the top. Dropped the cradle about w inches and un bolted the trans pushed it about 3 inches sideways.

OneCOLDBIZL272

iTrader: (2)

Just because it was easy out, doesn't mean it was easy to go back in. Hope you didn't have any problems. I was just meaning as an all around pull, easy in easy out no issues out the bottom props to you for going out the top.

speaking of which how was it going back in?

stealthy1ss

iTrader: (1)

Sorry I wasn't able to make it out to hwy. I was at the Sprint Cup race in Joliet raking in the ladies.



Also I ran the DD at GLD last Friday. I should bracket race this thing because I ran a 16.2 @ 82 on all 3 runs that I made.

Preston

[QUOTE=XD40_Bang!;5082408]When are you off next? I may require team rev to unite!




QUOTE]

i need to get my motor, if anyone wants to help swap it lol im at a lose and got the money for the motor, just need assistance!

i have off every friday to sunday night.

ebristol

iTrader: (4)

At a boy!

XD40_Bang!

It went back in with out a hitch. With the trans pushed to the side it came out and in very nice. There was a learning curve on what needed to all come loose but I had the car back together in in in one day. We fired the motor today and it runs way smooth. I would have never been able to get it done in the time that it took let alone found the motor for such a great price if it wasn't for jess"s dad. I'm going to spend some time returning the car completly back to stock so I can trade it in. I have my eye on a mazda speed in Il.

cobaltguy889

Just take care of the Mazda speed, don't treat it like your cobalt lol.

OneCOLDBIZL272

iTrader: (2)

Well that’s good, glad it went in perfectly with out any problems. And returning it back to stock shouldn’t really take you that long correct. All you really had to my last reselection was a strut bar, stereo, intake and the gmp cat back? or have you done lots more? and take care of the mazda, there really nice and fun to drive, mazda has some pretty wicked suspensions

cobaltshawn

Got my lnf tuned this weekend at west bend dyno with a hp tuner. I went from 295.5 whp 326 wtr to 327 whp 355.5 wtr. Not to bad I think on a mustang dynamometer

XD40_Bang!

Tom is the man!


Side note I have no plans for the mazdaspeed. If mazda offers aftermarket kits ill look into those but otherwise the car will remain un molested

ebristol

iTrader: (4)

Will you be willing to race my LSJ?

I can beat a GMS1 SS/TC but I want to try my hands on a "tuned" one.

http://www.youtube.com/watch?v=ZIbfEyyPmp0

cobaltguy889

ha! look at this guy!

cobaltshawn

Jya that would be fine by me when and where ever go to gld

stealthy1ss

iTrader: (1)

After you race Eric we can have a battle of the cut outs between us!

mkriebs

Best choice you could ever make. MazdaSpeed's are FRAGILE as hell.

venum_us_2002

looking for a stock lsj downpipe if anyone has one just cracked mine

ebristol

iTrader: (4)

Cool. I am wanting to try out my new toy.

XD40_Bang!

looks like an old to to me. wait... that direct port i see?