North East PA, NY, NJ, DE, MD, CT, RI, MA, NH, VT, and ME

Help Need A Redline/cobalt That Can Run 13.1 Or Lower With Out Nos

Old Oct 9, 2007 | 10:01 PM
  #51  
memphisr24's Avatar
Senior Member
 
Joined: 03-20-05
Posts: 6,313
Likes: 1
From: Rutherford, NJ
Well looks can be decieving...my friends blue srt4 looks completely stock..no springs/tint/eyelids/nothing. Runs 11.8 at 118.. I was about to purchase it but couldn't afford it

But yeah he is talking a lot of smack and I don't like it
Reply
Old Oct 9, 2007 | 10:17 PM
  #52  
jester's Avatar
Senior Member
 
Joined: 12-12-04
Posts: 1,720
Likes: 0
From: Pittsburgh,PA:Columbiana,OH
Originally Posted by memphisr24
Well looks can be decieving...my friends blue srt4 looks completely stock..no springs/tint/eyelids/nothing. Runs 11.8 at 118.. I was about to purchase it but couldn't afford it

But yeah he is talking a lot of smack and I don't like it
well looking at cakeeaters sig... I dont think he would have much to worry about with an 11.8 lol
Reply
Old Oct 9, 2007 | 10:41 PM
  #53  
memphisr24's Avatar
Senior Member
 
Joined: 03-20-05
Posts: 6,313
Likes: 1
From: Rutherford, NJ
Yeah but who knows what eBluesrt's srt4 has...he can have a 60 trim, built internals, and standalone for all we know....too bad niCe cars are sometimes owned my cocky people
Reply
Old Oct 9, 2007 | 10:51 PM
  #54  
Srt007's Avatar
New Member
 
Joined: 10-09-07
Posts: 5
Likes: 0
From: Dunellen
Dont kno much about the cobalt yet trying to learn but from ur sig looks like u have upgraded injectors what do u have controlling ur fuel? U have a piggyback or are u on stock PCM. Also whats ur A/F maybe ur running rich?
Hope any of that made sense lol good luck

-Matt
Reply
Old Oct 9, 2007 | 10:58 PM
  #55  
cakeeater's Avatar
Senior Member
 
Joined: 07-17-07
Posts: 9,378
Likes: 0
From: right behind you.
Originally Posted by memphisr24
Yeah but who knows what eBluesrt's srt4 has...he can have a 60 trim, built internals, and standalone for all we know....too bad niCe cars are sometimes owned my cocky people
looks like he is using the stock intercooler still. Im not worried about my statement being false. His car looks reasonably stock.
Reply
Old Oct 10, 2007 | 10:05 PM
  #56  
06blackg85ss's Avatar
Senior Member
iTrader: (1)
 
Joined: 04-22-06
Posts: 15,211
Likes: 20
From: New York
nah man, stock turbo, IC, just got an exhaust, injectors, WGA, motor mount I think, and apexi safc II I think that's about it
Reply
Old Oct 10, 2007 | 10:30 PM
  #57  
blacksssc06's Avatar
Thread Starter
Senior Member
 
Joined: 10-11-06
Posts: 531
Likes: 0
From: Easton, PA
wow talks alot 4 not haveing much work neon 4g63 wanna be
Reply
Old Oct 10, 2007 | 10:32 PM
  #58  
06blackg85ss's Avatar
Senior Member
iTrader: (1)
 
Joined: 04-22-06
Posts: 15,211
Likes: 20
From: New York
his car ain't no slouch my man, he just got it tuned on 20psi **** would give most cobalts a good run,

anyway back on topic. How's the car doin
Reply
Old Oct 10, 2007 | 11:02 PM
  #59  
cakeeater's Avatar
Senior Member
 
Joined: 07-17-07
Posts: 9,378
Likes: 0
From: right behind you.
Originally Posted by 06blackg85ss
his car ain't no slouch my man, he just got it tuned on 20psi **** would give most cobalts a good run,

anyway back on topic. How's the car doin
OHO! big man might be makin 300fwhp what a BEAST! cobalts are slow guys, watch out, this guy could probably put a few cars on most of you!
Reply
Old Oct 11, 2007 | 07:14 AM
  #60  
06blackg85ss's Avatar
Senior Member
iTrader: (1)
 
Joined: 04-22-06
Posts: 15,211
Likes: 20
From: New York
I've already seen him pull on a quite a few modded balts, not mine of course, but I'm also not s/c'd anymore.
Reply
Old Oct 11, 2007 | 07:26 AM
  #61  
skymynx's Avatar
Senior Member
 
Joined: 03-17-07
Posts: 1,530
Likes: 0
From: Eastern, CT
i might have to go down and represent the supercharger down at e-town. dropping off the head this weekend for port and polishing. still undecieded on valve job. so if im pushing 18 psi now and i'm gonna be having a port and polished head and supercharger, any idea what ill be pushing after? im figuring a decent amount less, but hopefully a decent amount less iat2's. so hows the car running now blackss
Reply
Old Oct 11, 2007 | 09:39 AM
  #62  
eBluSRT's Avatar
Member
 
Joined: 07-29-07
Posts: 208
Likes: 0
From: LongIsland
Originally Posted by memphisr24
What!?
what u mean what? read his sig. HA

Originally Posted by cakeeater
wow i love the fact that this guy is talking so much smack and i can tell his car isnt fast just by looking at the pic in his sig.
...

its all jus fun n games. like ruffleing the feathers of these cobalt guys wh o dont have mods n say its fast. lets not every1 get testy.

obviously cakeeater your not even in that catagory. what other mods u got on that thing?

Last edited by eBluSRT; Oct 11, 2007 at 09:39 AM. Reason: Automerged Doublepost
Reply
Old Oct 11, 2007 | 10:27 AM
  #63  
blacksssc06's Avatar
Thread Starter
Senior Member
 
Joined: 10-11-06
Posts: 531
Likes: 0
From: Easton, PA
Originally Posted by 06blackg85ss
his car ain't no slouch my man, he just got it tuned on 20psi **** would give most cobalts a good run,

anyway back on topic. How's the car doin
well everything seem to be ok af is 11.6 wot pulls a lot more int he lower rpm but if you change my boost to 18psi i wanted to know if you think it would be safe to add more timming to the top cause when i was running 20 psi i was getting knock at the higher rpms this is why if you looked at my tune there was 25 than there was a few at 24 im going to listen to you guys and down size the pully to a 2.8 i need some input on this and it just pissing me off casue my car should be doing 13.1 or lower and im trying like a mother to work the bugs out but anyway what your guys input on a new clutch too as well

o and when i get a chance i well get on the scanner and do some pulls 4 ya and send it to you it well most likely be on sat
Reply
Old Oct 11, 2007 | 10:45 AM
  #64  
06blackg85ss's Avatar
Senior Member
iTrader: (1)
 
Joined: 04-22-06
Posts: 15,211
Likes: 20
From: New York
sounds good man, I"ll be around saturday so I'll give them logs a look.
Reply
Old Oct 11, 2007 | 11:04 AM
  #65  
RedlineBrian's Avatar
Senior Member
 
Joined: 07-07-06
Posts: 2,955
Likes: 0
From: Long Island, NY
Nick what are you doing to these guys? hahaha
Reply
Old Oct 12, 2007 | 02:58 AM
  #66  
eBluSRT's Avatar
Member
 
Joined: 07-29-07
Posts: 208
Likes: 0
From: LongIsland
i dunno just figured i'd stir the pot
Reply
Old Oct 12, 2007 | 11:58 AM
  #67  
cakeeater's Avatar
Senior Member
 
Joined: 07-17-07
Posts: 9,378
Likes: 0
From: right behind you.
Originally Posted by eBluSRT
what u mean what? read his sig. HA



...

its all jus fun n games. like ruffleing the feathers of these cobalt guys wh o dont have mods n say its fast. lets not every1 get testy.

obviously cakeeater your not even in that catagory. what other mods u got on that thing?
well a termi crank with manley rods and CP pistons are going in possibly this weekend if i can get home. Then i'm planning on fabbing up a front mount instead of this shitty air/water cooler, and depending on how money is by the time that's all together i may get my heads ported and polished. Gonna keep stock cams though to keep it somewhat streetable. I gotta get a 9" somewhere too, haven't quite worked that out yet. Money is getting tight, thank god i have another car to drive around.
Reply
Old Oct 12, 2007 | 12:23 PM
  #68  
RedlineBrian's Avatar
Senior Member
 
Joined: 07-07-06
Posts: 2,955
Likes: 0
From: Long Island, NY
does the mach 1 have irs stock?
Reply
Old Oct 12, 2007 | 01:51 PM
  #69  
eBluSRT's Avatar
Member
 
Joined: 07-29-07
Posts: 208
Likes: 0
From: LongIsland
Originally Posted by cakeeater
well a termi crank with manley rods and CP pistons are going in possibly this weekend if i can get home. Then i'm planning on fabbing up a front mount instead of this shitty air/water cooler, and depending on how money is by the time that's all together i may get my heads ported and polished. Gonna keep stock cams though to keep it somewhat streetable. I gotta get a 9" somewhere too, haven't quite worked that out yet. Money is getting tight, thank god i have another car to drive around.
nice. sounds like quite the project. good luck.
Reply
Old Oct 13, 2007 | 03:38 PM
  #70  
BlackSS05's Avatar
Senior Member
 
Joined: 06-09-05
Posts: 2,508
Likes: 0
From: Eastern LI NY
these damn srts are taking over the NE forums. Nick will meet his match soon. O and stock srt vs ss with injectors ONLY and SS took the W.
Reply
Old Oct 13, 2007 | 03:39 PM
  #71  
cakeeater's Avatar
Senior Member
 
Joined: 07-17-07
Posts: 9,378
Likes: 0
From: right behind you.
Originally Posted by BlackSS05
these damn srts are taking over the NE forums. Nick will meet his match soon. O and stock srt vs ss with injectors ONLY and SS took the W.
why would an ss have injectors only? that makes absolutely no sense...
Reply
Old Oct 13, 2007 | 03:45 PM
  #72  
BlackSS05's Avatar
Senior Member
 
Joined: 06-09-05
Posts: 2,508
Likes: 0
From: Eastern LI NY
he blew up his car took it back to the dealer with stock pulley on it. Got it back last night and came out with 42.5 injectors and thats it. Stock pulley, exhaust, intake all of that ****. he posts on here WheelhoppinSS his name is marc.
Reply
Old Oct 13, 2007 | 04:26 PM
  #73  
cakeeater's Avatar
Senior Member
 
Joined: 07-17-07
Posts: 9,378
Likes: 0
From: right behind you.
Originally Posted by BlackSS05
he blew up his car took it back to the dealer with stock pulley on it. Got it back last night and came out with 42.5 injectors and thats it. Stock pulley, exhaust, intake all of that ****. he posts on here WheelhoppinSS his name is marc.
so he was running injectors that much bigger than stock with no tune?
Reply
Old Oct 13, 2007 | 04:52 PM
  #74  
BlackSS05's Avatar
Senior Member
 
Joined: 06-09-05
Posts: 2,508
Likes: 0
From: Eastern LI NY
noo he was tuned lol. but other than that it was STOCK. BCP tuned every cobalt that came out last night lol.
Reply
Old Oct 13, 2007 | 04:53 PM
  #75  
WickedSS2005's Avatar
Senior Member
iTrader: (1)
 
Joined: 07-02-05
Posts: 8,725
Likes: 2
From: West Carrollton (Dayton), OH
subscribed
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:56 PM.