WHO's LEFT? def time for a new list
#28
Senior Member
ohhh now you bitches wanna race, I swear this is some bullll, I hope my deployment will be over by christmas and its on like donkey kong, FU brian...
-Sultan of Slide
-Sultan of Slide
#29
Senior Member
Join Date: 09-09-07
Location: Vancouver, WA
Posts: 1,377
Likes: 0
Received 0 Likes
on
0 Posts
ssyeller would dominate either of u, fight for second place :-P
his was the fastest fwd i've ever driven. even taking almost two seconds to finally get it into third, the car posted 14's. lol
his was the fastest fwd i've ever driven. even taking almost two seconds to finally get it into third, the car posted 14's. lol
#30
Senior Member
iTrader: (1)
Join Date: 07-27-07
Location: Puyallup, WA
Posts: 17,332
Likes: 0
Received 0 Likes
on
0 Posts
Just got the invader carbon fibre hood. rerouting turbo tubing and cold air location. Taking out the fins in the intake. Installing larger throtle body. New cam.
Putting in traslucent yellow acrylic trunk floor with new sub woofers. Soon new custom paint job. Welding cross bar to stiffen undercarriage. Put in new head bolts and head gasket.
Drove my clutch through the firewall after putting in second clutch master cylinder.
Installed new clutch pedal and new seperate Master Cylinder (willwood) and reinforcing the firewall with a new steel plate. The new clutch Master Cylinder has a new feel and much easier to control launch. No longer need to power bleed.
Scheduled install of recalled steering unit. Mine is about gone 114,000 miles now on the car.
Probably coming up with Jon Ellis HHR ss turbo with tubing and tune also from Woodland.
Putting in traslucent yellow acrylic trunk floor with new sub woofers. Soon new custom paint job. Welding cross bar to stiffen undercarriage. Put in new head bolts and head gasket.
Drove my clutch through the firewall after putting in second clutch master cylinder.
Installed new clutch pedal and new seperate Master Cylinder (willwood) and reinforcing the firewall with a new steel plate. The new clutch Master Cylinder has a new feel and much easier to control launch. No longer need to power bleed.
Scheduled install of recalled steering unit. Mine is about gone 114,000 miles now on the car.
Probably coming up with Jon Ellis HHR ss turbo with tubing and tune also from Woodland.
#31
Senior Member
Join Date: 11-19-09
Location: Vancouver, WA
Posts: 1,886
Likes: 0
Received 0 Likes
on
0 Posts
sooooo, not trying to thread jack but who in washington has a megan cat-back? any one know the laws? is it something like it cant be louder than stock? and do you run with no silencer? haha thanks guys.
#38
Senior Member
iTrader: (1)
Join Date: 07-27-07
Location: Puyallup, WA
Posts: 17,332
Likes: 0
Received 0 Likes
on
0 Posts
as katsu said, if i can drive around without getting a ticket then your fine
and yes skyler...it is that loud hahaha
ive been pulled over, but no ticket, just a warning on it by a state trooper in town. i pull up next to city cops all the time in my car, drive by the popo station and no problems
#43
Member
iTrader: (1)
Join Date: 06-07-06
Location: Woodland, Wa
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Update while the head was off had it Ported
My son did most of the raw work and a machine shop finish it. It should be interesting.
Also building custom intake instead of stock.
We are also going to see if a LS 1 intake can be modified to fit the invader hood.
My son had one laying around.
We hope to pu around 50 hp when done. Total 375 or so. We will see.
Any ideas of what to buy and where to get them would be helpful.
You can PM me if needed not to change the topic.
Also building custom intake instead of stock.
We are also going to see if a LS 1 intake can be modified to fit the invader hood.
My son had one laying around.
We hope to pu around 50 hp when done. Total 375 or so. We will see.
Any ideas of what to buy and where to get them would be helpful.
You can PM me if needed not to change the topic.
Last edited by ssyeller; 04-17-2010 at 09:45 PM. Reason: Automerged Doublepost
#45
Senior Member
iTrader: (1)
Join Date: 07-27-07
Location: Puyallup, WA
Posts: 17,332
Likes: 0
Received 0 Likes
on
0 Posts
My son did most of the raw work and a machine shop finish it. It should be interesting.
Also building custom intake instead of stock.
We are also going to see if a LS 1 intake can be modified to fit the invader hood.
My son had one laying around.
We hope to pu around 50 hp when done. Total 375 or so. We will see.
Any ideas of what to buy and where to get them would be helpful.
You can PM me if needed not to change the topic.
Also building custom intake instead of stock.
We are also going to see if a LS 1 intake can be modified to fit the invader hood.
My son had one laying around.
We hope to pu around 50 hp when done. Total 375 or so. We will see.
Any ideas of what to buy and where to get them would be helpful.
You can PM me if needed not to change the topic.
#48
Senior Member
iTrader: (1)
Join Date: 06-21-09
Location: Seattle
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
agreed! i want mine done lol.
and yes tom, i dont think anyone has heard how loud it is latley.. haha
Last edited by CobaltKatsu; 04-18-2010 at 10:45 PM. Reason: Automerged Doublepost
#49
Banned
iTrader: (1)
Join Date: 09-12-09
Location: tacoma wa
Posts: 1,927
Likes: 0
Received 0 Likes
on
0 Posts
to bad its just loud and thats it
i have 1500 to spend on car parts. expect to see me very close to 300whp.
i have 1500 to spend on car parts. expect to see me very close to 300whp.
Last edited by blk06cbltss; 04-18-2010 at 11:27 PM. Reason: Automerged Doublepost