Pics Will Be Taken Promptly, If Your Local Feel Free To Pass By & Have A Look

Hello there, my engine went bad like 2 months ago " A spark plug end melted and broke inside . I didnt havet to disssemble it and figure out whats wrong with it so i put a new one in, i had my old one looked at last week and tested, it has no compression in cylinder 3, after perfroming some leak tests on it it turned out to have bad exhaust valves on that specific cylinder, and it only needed replacement :x

So my new engine runs great, and this Stuff is taking too much space in my garage. I Dont want these in my garage and will sell mad cheap too

Stock Parts " 36,000 miles " Throw Me Offers & Most Likely Will Be Urs

*Long Block " Complete From Oil Pan To Valve Cover - The Engine is disassembled right now and willing to sell components sepreatly as it's already parted out - Piston # 3 & The Head In Cylinder # 3 are scratched due to a part of the spark plug breaking-melting and jumping around - The engine would be geat for a rebuild or just having the valves replaced on that cylinder only- if i knew that was the problem i woulda fixed it oh well "

Long Block N/A


The Bottom Items Are Prices Shipped OBO

* Spark Plugs Cover $ 20
* Stock Injectors W/ Harness $ 40
* Engine Braket For Upper Mount $ 20
* Ignition Coils * 4 W/ Harness$ 50 or $ 20 Each

* Special: All The Above Accessories $ 80



* Fuel Rail SOLD
* Valve Cover SOLD
* Pre Cat O2 Sensor SOLD
* Tensioner Pulley ---SOLD
* IC Pump---SOLD
* IC Pump Brakets---SOLD
* Stock Exhaust Manifold SOLD
* Exhaust Manifold Gasket " New In Packaging " SOLD
* Exhaust Manifold Heatsheild SOLD
* Short Block Complete Assembly---Used & Works !!!! **** SOLD !!!
* Head Complete With Cams, Rocker Arms & Valvetrain **** SOLD
* Stock LSJ SS/SC Exhaust " Click Below For Pics & Details **** SOLD
https://www.cobaltss.net/forums/parts-66/stock-cobalt-ss-sc-lsj-full-exhaust-system-polished-chrome-tip-213656/
* Stock LSJ SS/SC Flywheel & * Stock LSJ SS/SC Clutch With Pressure Plate " About 5k's On It No Slippage..Like New...Upgraded To A Different Clutch " **** SOLD

Performance Parts :

* Dual Pass End Plate With Pipping - 120 $ Shipped " Like New From Italianjoe- Never Installed " ---SOLD
* Complete Option B Kit With Brakets, Hoses & Clamps " Full Complete Kit " 90 $ ---SOLD
* Used ZZP Black 4 Bolts 2.9 Pulley " Fits GM Stage 2 Hub " 30 $ ---SOLD

 

Post up pics of these parts....if all is good consider them sold

...I'll be back on tomorrow afternoon to check in.

 

imma go ahead n take pics now for them and i'll pm u

 

do you have the intercooler pump connector?

 

do u mean the actual hose or the brakets that hold the pump to the engine ?

 

sunburst do you have the seals for the end plate?

 

I want the long block but shipping will be $$$

l8r,
PD

 

i had them at one point, they got lost in my garage in all the mess i had during the engine swap and old engine part out :x

i have no idea how much shipping will be man :x i would assume like a 100-150 $ but yet again i might be wrong, i do have a business account with ups, so i'll check my frieght rates

 

hmm I told rally if you couldnt find them tom at CED has the p/n's maybe he can get them. Thanks! just wanted to make sure for rallyracer.

is all the other hardware there to bolt up the option b and end plate though? ie. nuts for the tank, hoses, hose clamps, etc.

 

gotcha, yeap the option b is complete he wont have to go to the hardware store to get any parts, i got the kit from zzp with the mounting hardware " i replaced the hoses and got the black ones as i dont the clear ones- i have them if rally wants them thou as for the end plate he will have to use the screws that are on his stock end plate that what he needs to do, and get the seals so pretty much all he needs is the seals and he's good to go...

Ic pump & brackets are sold

 

ah cool. Ya idk why but I'd rather have black than clear too..haha I'm just looking out for rallyracer and finding good parts for him, cheap so he can mod and not **** off his wife

Anyway just for reference, seals needed for gmpp end plate:
1-12584355 Seal
1-12584333 Seal

 

yeap yeap true that donn **** the wife off, i know exaclty how that feels gmpartsdirect has them cheaper than CED i beleive...nyways keep me updated

 

no like the electrical connector

 

if its the one with the annoying clips on the end i believe i've got it, i'll look around tomorrow morning and will reply back to u on here

 

thank you, include a picture if you can

 

np dude will do

good night bump

 

how much for longblock...

 

^i want it! if i had the monies :/

 

bump for a fellow srtc... and if you still got the pulley dibs.. pm me

 

pm'd

pm'd

Hey budd..im sorry i dont have it...i couldnt find it

Updated Thread...Uploaded Pics For Everything & Replied To PMs...Afternoon Bump...I Want These Gone So Juss Throw Me An Offer & Take Them Off My Hands

Just Throw Me An Offer

 

Still have the dual pass/opt b?

 

yes however there's a sale pending with rallyracer at the current time, if he opts out or changes his mind, it will be up for sale again.

thanks for ur interest man.

 

sounds good

 

bumpty i know somebody needs this stuff hehe

 

still got your valve cover?