Mark this thread as Unsold
Coming up for sale - injectors
11-01-2007, 03:39 PM
#1
Senior Member
Thread Starter
Join Date: 05-02-07
Location: San Jose, CA
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Coming up for sale - injectors
Okay, I have some new "secret injectors" coming in the mail, so I am going to sell my flow matched siemens 60s and my siemens 42s.
The 42s came with stage 2 from the factory, but were sent out to Yaw Performance for full flow testing. They will have not only static flow, but also dynamic flow, offset vs volts vs Vac and adders. All the numbers that GM got wrong with the stage 2 flash. All testing was done with gasoline at 120*f.
The 60s are flow tested within 1% (62.4lbs/hr average) from new era performance. I can prolly help you with the fueling numbers for these.
You will need a harness adapter to run these injectors on a stock cobalt. CA has a nice adapter for about $45.
Anyone interested?...
The 42s came with stage 2 from the factory, but were sent out to Yaw Performance for full flow testing. They will have not only static flow, but also dynamic flow, offset vs volts vs Vac and adders. All the numbers that GM got wrong with the stage 2 flash. All testing was done with gasoline at 120*f.
The 60s are flow tested within 1% (62.4lbs/hr average) from new era performance. I can prolly help you with the fueling numbers for these.
You will need a harness adapter to run these injectors on a stock cobalt. CA has a nice adapter for about $45.Anyone interested?...
11-02-2007, 12:18 AM
#5
Senior Member
Thread Starter
Join Date: 05-02-07
Location: San Jose, CA
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
I do not yet have prices on the injectors yet. I will be getting the numbers for the 60s and flashing a tune with them to make sure they are good. I will also be recruiting someone to beta test the numbers for the stage 2 injectors. When I sell these injectors, the person who buys them will have all of the info they need to plug into HPTuners to get an awesome tune (at least as far as the fueling tabls are concerned). ONLY when I know for sure that the numbers will work will I ask a price.
I know this sounds kinda strange, but there area lot of people running bad 60s tunes with good injectors and 110% duty cycles with stock stage 2. I don't want whoever buys these to deal with any of those issues.
I know this sounds kinda strange, but there area lot of people running bad 60s tunes with good injectors and 110% duty cycles with stock stage 2. I don't want whoever buys these to deal with any of those issues.
11-02-2007, 12:24 AM
#6
Member
Join Date: 05-07-07
Location: Nebraska
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
I do not yet have prices on the injectors yet. I will be getting the numbers for the 60s and flashing a tune with them to make sure they are good. I will also be recruiting someone to beta test the numbers for the stage 2 injectors. When I sell these injectors, the person who buys them will have all of the info they need to plug into HPTuners to get an awesome tune (at least as far as the fueling tabls are concerned). ONLY when I know for sure that the numbers will work will I ask a price.
I know this sounds kinda strange, but there area lot of people running bad 60s tunes with good injectors and 110% duty cycles with stock stage 2. I don't want whoever buys these to deal with any of those issues.
I know this sounds kinda strange, but there area lot of people running bad 60s tunes with good injectors and 110% duty cycles with stock stage 2. I don't want whoever buys these to deal with any of those issues.
Thread
Thread Starter
Forum
Replies
Last Post