Mark this thread as Unsold
For Sale Complete Part-Out Supercharged L61
#1
New Member
Thread Starter
Join Date: 12-19-12
Location: usa
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Complete Part-Out Supercharged L61
Name: Luis
Location: El Paso, TX
Contact: PM or Text preferably (915-667-3468)
So my boosted l61 went 2 weeks ago and I'm just going to part it completely.
Only things I'm keeping is the motor and transmission to see what went wrong with a completely built motor.
Anyways, on to the goodies ..
Complete SC kit for a 2.2/
(M62 w/ 2.9 pulley, 42 lbs injectors, intake manifold, lower IM bracket, stage 2 belt with rib already cutoff, tensioner w alternator bracket, IC pump with bracket, heat exchanger, LSJ 2.5 bar map sensor with pigtail, all gaskets, etc)
750$
ZZP 3" Cold Air Intake
Complete with coupler and 3 clamps (will include with sc kit if not sold already)
GlowShift boost gauge complete
30$
Trifecta Black Box Cable (works with all cobalts)
110$
ZZP long tube header/dp combo (catless with 2nd bung welded for wideband) still on car so I apologize for picture quality
240$
Not sure of brand but 90% sure it's ZZP full cat back . 2.5 " true exhaust, no crush bends. Will take off if you need better pictures. (Only thing I cut off muffler and welded my own custom muffler, will include if wanted
100$
2.2 alternator and perfectly good radiator ( not sure what models it fits as this was an LS)
50$
And the rest just ask me for pictures if you're looking for anything in particular, have black HVAC, red high rise, victory red trim, CARBON FIBER TRUNK AND CARBON FIBER FRONT LIP.
If you don't like prices, shoot me an offer as they all are OBO. Need to get rid of everything ASAP.
UPDATE
Red high rise wing (excellent condition give it an 8/10)
90$
Haven't taken a picture of the trunk yet, but it is Carbon Fiber. Perfect condition
Location: El Paso, TX
Contact: PM or Text preferably (915-667-3468)
So my boosted l61 went 2 weeks ago and I'm just going to part it completely.
Only things I'm keeping is the motor and transmission to see what went wrong with a completely built motor.
Anyways, on to the goodies ..
Complete SC kit for a 2.2/
(M62 w/ 2.9 pulley, 42 lbs injectors, intake manifold, lower IM bracket, stage 2 belt with rib already cutoff, tensioner w alternator bracket, IC pump with bracket, heat exchanger, LSJ 2.5 bar map sensor with pigtail, all gaskets, etc)
750$
ZZP 3" Cold Air Intake
Complete with coupler and 3 clamps (will include with sc kit if not sold already)
GlowShift boost gauge complete
30$
Trifecta Black Box Cable (works with all cobalts)
110$
ZZP long tube header/dp combo (catless with 2nd bung welded for wideband) still on car so I apologize for picture quality
240$
Not sure of brand but 90% sure it's ZZP full cat back . 2.5 " true exhaust, no crush bends. Will take off if you need better pictures. (Only thing I cut off muffler and welded my own custom muffler, will include if wanted
100$
2.2 alternator and perfectly good radiator ( not sure what models it fits as this was an LS)
50$
And the rest just ask me for pictures if you're looking for anything in particular, have black HVAC, red high rise, victory red trim, CARBON FIBER TRUNK AND CARBON FIBER FRONT LIP.
If you don't like prices, shoot me an offer as they all are OBO. Need to get rid of everything ASAP.
UPDATE
Red high rise wing (excellent condition give it an 8/10)
90$
Haven't taken a picture of the trunk yet, but it is Carbon Fiber. Perfect condition
Last edited by Luis21UofH; 06-23-2014 at 01:39 PM.
#8
New Member
Thread Starter
Join Date: 12-19-12
Location: usa
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
#23
Luis. Can you respond to me. The AEM wideband you sent me, I'm not sure if it was damaged and sent, or damaged during shipment. It would be nice if you responded to my text messages. Or would it be easier on this post? The faceplate is in poor condition, and the gauge doesn't power up when powered. And yes. I've checked my connections with a multimeter.... can post pics. Please respond.
#24
Luis. Can you respond to me. The AEM wideband you sent me, I'm not sure if it was damaged and sent, or damaged during shipment. It would be nice if you responded to my text messages. Or would it be easier on this post? The faceplate is in poor condition, and the gauge doesn't power up when powered. And yes. I've checked my connections with a multimeter.... can post pics. Please respond.