UPDATE. Hubs and BPV are bought and paid for. Thanks for your interest.




Prices are OBO. Shoot me a PM if you have any questions or are interested. No dibs or holding the item. The first person to pay gets them. Descriptions may be a bit embelished because I'm bored and can type fast.

Forge BPV. Less than 3,000 miles. Yellow spring never used. The factory grease is still pink. Normally costs $100.00+ shipped. Get this "like new" one for much less. This wonderful mod will make your BPV sound awesome. Studies have proven that the sound of a Ferrari's engine/exhaust can actually cause an instantanious increase of vaginal secretions in attractive females. This BPV sounds better than a Ferrari!!! The Forge BPV is almost kind of a little bit maybe guaranteed 1% of none of the time to GET YOU LAID!!!!! It's functional as well. The stock rubber BPV can crack over time. It's rumored that the outer plastic casing of the stock BPV is made of C4 on certain production dates. So far there have been an undetermined amount of casualties because there have been no survivors of this imaginary scenario where someone is checking their oil and then blown to pieces by the C4. The Forge BPV is made from top quality aluminium and WILL NOT EXPLODE!!! This item could save your life!!!!!!













Okay folks. This next item up for sale is a once in a lifetime opportunity. These are hubs for 08-10 SSs that are drilled with the much desired 5x114.3 bolt pattern. They may fit LSJ models but I don't know. With these hubs your wheel choices will become nearly LIMITLESS!!! Imagine if you will, having the ability to buy those Volks, Rays, spinning dubs, etc. you've had your eyes on for years. If you have ever wanted to be crowned Featured Cobalt of The Month , this is your chance!!!! But wait, there's more. These hubs still retain their factory 5x110 bolt holes. Simply switch the wheel studs back to their original holes and you have a nice set of used OEM hubs. These are a light weight upgrade over the OEM hubs due to the amount of heavy steel removed during drilling the new holes. Weight loss is estimated to be approximately 0.08%. This is the equivelant of approximately 0.0035 HP. Not too shabby for a simple bolt on. How much would you expect to pay for such a high quality product? $1,000.00?
$800.00? $700.00?????? NO!!!! Act now and you will receive not one, not two, not three but FOUR hubs for the unbelievable low price of only $150.00. Order now and pay $0.00 for shipping and handling. Limit one set per customer. Supplies are limited to one set.

My PM box is standing by.

Disclaimer: These hubs are sold as is. I never installed or tested them because I have decided to go with Timken hubs instead. They seem to turn freely and don't have any play. I was told they were made by a member on here that has done a ton of these but I don't remember his userID. I was also told that they have approximately 25-30K miles on them. There is a small chip on one of the sensors where it connects to the hub itself. Nothing is exposed and the sensor is still held strongly in place.

NO money Back Guarantee but...........If they don't work do not worry. There are hundreds of other uses for them. They could be used as a pattern to custom drill another set of hubs. They could be used as weapons during the impending Zombie Apocolypse scheduled for December 21st of this year. They can be used as boat anchors. Take them to the office and use them as paper weights on four different desktops at once. Used hubs are the perfect gift for that person who has everything. Open them up and you have an instant ball bearing collection. The possibilities are endless!!!!!!

 

how much for the watch

 

That was supposed to be a creative way of displaying my userID. You see, the watch is a Casio. Then I wrote the word "Nerd" to the right of the watch. Add them together and you get "casionerd." Instead, it looks like I just used the watch to hold the paper.

 

To use those hubs u need LNF knuckles. i think there are others u can use like g6 knuckles but im not 100% Glws and funny post haha

 

They should bolt up to an LNF. Others.... don't know. I'm guessing you're talking about non LNF models. Not sure what kinds of knuckles will work but moose knuckles will not fit.

 

Ill take the BPV..just because of the awesome thread. PLEASE PM ME!

 

will u ship the bpv to markham canada? ill take it if mkulrey doesnt :p

 

yea thats what i meant, LNF cars have LNF knuckles. and to whoever swapped to LNF knuckles

 

how about, like the lights, i just swing by and pick up those hubs for free? consider it your sponsor ship of my car, that way i can run the weld wheels i've been needing to pick up. i'll even wear the watch you sent me at the awards banquet this year and any time in the winners circle.

 

LNF hubs do not interchange with LSJ. They physically bolt on, but the axle splines are different and the wheel speed sensors are different.

 

really? i thought the LSJ knuckles had the 3 holes for hubs and the LNF had 4. not trying to be a dick just trying to clarify :P

according to this all of the knuckles except the LNF are interchangeable

https://www.cobaltss.net/forums/susp...m4-jl9-137064/

 

gee and i thought it was a timer for the C4 in the BOV.

 

I dunno, maybe the ones pictured are LSJ then, because they look just like them and only have 3 holes.

 

ooo isee whats up. I think 2 of them have 4 studs and the other 2 have 3 holes. in the OP picture, im confused haha

 

The ones with studs are rears.

 

gotcha, so we'll leave it at your original statement. sorry for the confusion to whoever is reading this

 

I vote this thread as best f/s thread if the year! i lol'd pretty damn hard :-)

 

Sent you a PM

No problem shipping to Canada if mkurley13 doesn't want them.

BTW, this is my first multiquote reply ever.

 

Take me to ZZP with you and they're yours.

I'll drive to your house just before you leave and I'll even pay for some of your meals.

 

These hubs were supposidly taken from an 08 SS/TC. In the pics I turned them over so you see the front and backs of the front and rear hubs. The rears have four bolts and the fronts have three. If these are not for an LNF it's a big surprise to me but I've been ripped off before so.... who knows.

I looked at my LNF hubs while they were still on the car and they looked the same but I never test fit them.

 

pmd

 

cool let me know if it is still avaliable, thanks!

 

Hubs are going to Canada. BPV is still up for grabs.

 

canada!?!? i was gonna take you to zzp.... lol seriously

 

Yep, Canada