Cobalt SS Network

Cobalt SS Network (https://www.cobaltss.net/forums/)
-   Parts (https://www.cobaltss.net/forums/parts-66/)
-   -   FS; non lsd tranny and clutch/flywheel (https://www.cobaltss.net/forums/parts-66/fs%3B-non-lsd-tranny-clutch-flywheel-95009/)

qr25det 02-05-2008 07:10 PM

FS; non lsd tranny and clutch/flywheel
 
just replaced the non-lsd tranny in my 05 ss due to a bearing noise i started hearing a month ago, when i got the tranny off its was apparent the throwout bearing is toast, but already had a lsd tranny so it was replaced. also went ahead and replaced clutch with only 71k miles.. car is driven by my g/f so its never seen the track. can take extra pics if necessary and will ship or meet anyone in florida halfway for delivery on either or both parts. make resonable offers or possible trade of aftermarket parts.
https://www.cobaltss.net/gallery/fil...0/9/clutch.jpg
https://www.cobaltss.net/gallery/fil...0/9/tranny.jpg

ecotecon18s 02-05-2008 07:24 PM

so was the tranny bad or just the throwout bearing?? i might be in need of an SS/SC tranny very soon...

spaz 02-05-2008 08:00 PM

I 'll give you $275 shipped, how much does it weigh?

qr25det 02-05-2008 08:20 PM

ecotecon18s- far as i know its just the throw out. i can take it to a tranny shop and have it completely run through. i'll just tack the expense onto the best offer i receive. there isn't any play in the input shaft and its had royal purple put in it every 15k.

spaz- ways a little over 100 lbs according to the label i got with the new tranny, cost me 200 in shipping from crate engine. so you'd have to come with a better offer then that.

ecotecon18s 02-05-2008 08:36 PM


Originally Posted by qr25det (Post 1919339)
ecotecon18s- far as i know its just the throw out. i can take it to a tranny shop and have it completely run through. i'll just tack the expense onto the best offer i receive. there isn't any play in the input shaft and its had royal purple put in it every 15k.

spaz- ways a little over 100 lbs according to the label i got with the new tranny, cost me 200 in shipping from crate engine. so you'd have to come with a better offer then that.

well im in central florida, i would prolly be able to pick it up from you. But I have to wait and see if warranty is gonna cover mine first, then if you still have it, i'll prolly take it...

qr25det 02-11-2008 06:52 PM

someone help me clean out the garage and buy these.

sunfirejoe 02-11-2008 11:25 PM

what do u want shipped for the tranny to s9v1c1

scribbles 02-11-2008 11:26 PM

Hows the input shaft? Any damage done to it? A misaligned throwout bearing can eat the bearings on the inside if not more.

qr25det 02-12-2008 05:14 PM

input shaft is undamaged in appearance on outside and has no bearing play in it. just the throw out seems to be bad. i can take a vid of what the play is if you'd like and load it on utube or something

sunfirejoe, need more of address to quote you on shipping, but i'd at least like to get 500 plus shipping.

qr25det 02-16-2008 08:47 AM

bump for a fresh look

qr25det 02-21-2008 10:21 AM

well after a week of no work i'm needing some cash so i'll just about take any offers now, low ballers welcome.

qr25det 03-05-2008 05:12 PM

to the top

qr25det 08-07-2008 05:00 PM

Still have these if anyone wants them, at this point i'll take any offers

an0malous 08-08-2008 10:36 PM

can you be sure it was only the throwout causing the noise?
possibly interested here. lookin for more info.

qr25det 08-11-2008 05:33 PM

not w/o pulling it apart and checking everything, but shifted fine it just made too much noise when the clutch wasn't depressed, the t/o bearing is toast though, g/f road the clutch like a damn grandma as you can see in the pics. i'm not looking for alot i traded my balt in on a new one and just have this taking up space. And i couldn't begin to tell ya what it'd cost to ship to canada.

qr25det 12-31-2008 12:20 PM

cleaning out the garage, Best offer can have these, not looking to ship local pickup/delivery only. Highest offer by 01-09-09 takes them.


All times are GMT -4. The time now is 07:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands