Mark this thread as Unsold
FS: Stock M62 full assembly. $300 shipped in the US.
FS: Stock M62 full assembly. $330 shipped WITH LSJ TB!!!
Yup. Got an M62 here with 32,000 miles on it. It has been run it's whole life with the stock pulley. You get the bypass solenoid, it's lines, and the stock pulley. Sorry I can't include the SCIP sensor and bracket, but you can get those parts new from a dealer for less than $50 total. Also for an extra $75 I will include the LSJ throttle body and instructions on how to change your stock wiring for an LSJ throttle body. Hell of a deal!
Last edited by StreetDreamz; Apr 23, 2009 at 11:42 AM.
If you're putting this on a 2.4 then you don't need the SCIP sensor and bracket because the stock PCM doesn't monitor it. All you have to do it tap the hole with a tap and thread a bolt into it to block it off. I can even do it for you. I don't have any pictures right now, but I can snap some in the AM if you want.
FYI I also do installs of the SC on the 2.4 and tuning. My packages usually run about $2500 for the 2.4 installed and tuned, all neccessary parts, with an Injen intake, new ss/sc washer fluid resovoir, and you get to keep the AEM wideband I use to tune your car when I'm done.
Yup, I've done quite a few of them. Some even on this very forum!
FYI I also do installs of the SC on the 2.4 and tuning. My packages usually run about $2500 for the 2.4 installed and tuned, all neccessary parts, with an Injen intake, new ss/sc washer fluid resovoir, and you get to keep the AEM wideband I use to tune your car when I'm done.
Yup, I've done quite a few of them. Some even on this very forum!
Last edited by StreetDreamz; Apr 14, 2009 at 11:21 PM. Reason: Automerged Doublepost
yeah dude, if I buy it could you take care of that for me! I dont really need anyone to do the install me and my buddy can do it, besides you stay in WV im in and out of VA and NC. If i end up needing it to be installed ill get with you about it on May 1st. Ill let you know though dude. ill be deploying soon, so if i have to have it installed by someone else then ill have my buddy meet up with you.
Sounds good. Yeah I can tap that bolt in there no problem. PM me if you want the thing and we'll get her taken care of today! If you buy now I'll knock $25 off the LSJ throttle body if you want it!
Actually about 111 more parts. LOL. I'm in the process of building my 2.2. Hey i seen you have a 04 cavalier. did you do tuning on it. the reason i ask is cause I have a 04 ion sedan that i'm fixing up also and i have ran in to the problem getting it tuned. I was thinking of just swapping over to a 04 cavalier pcm since it's the closest to mine and the cavalier pcm is tuneable. thanks. Bump 4 u
Yup. Got an M62 here with 32,000 miles on it. It has been run it's whole life with the stock pulley. You get the bypass solenoid, it's lines, and the stock pulley. Sorry I can't include the SCIP sensor and bracket, but you can get those parts new from a dealer for less than $50 total. Also for an extra $75 I will include the LSJ throttle body and instructions on how to change your stock wiring for an LSJ throttle body. Hell of a deal! 

what would the price of LSJ intake manifold plus shipping to Chile, I hope your answer
Thread
Thread Starter
Forum
Replies
Last Post
camaromanss1992
Parts
3
Oct 1, 2015 10:51 PM
09BlkCrusader
Parts
30
Sep 9, 2015 04:47 PM



