Mark this thread as Unsold
GMPP Stage3 PCM $250
GMPP Stage3 PCM $250
I really need to sell this GMPP Stage3 PCM.
I'm desperate and have priced it to move, $250!!!
Sells for $388 plus s/h, over on www.crateenginedepot.com So this is a helluva deal.
I'm desperate and have priced it to move, $250!!!
Sells for $388 plus s/h, over on www.crateenginedepot.com So this is a helluva deal.
I'll gladly sell it to you. I don't know how to prove it. I can assure you it works. If you did have a problem, if you pay through paypal you'd have extra insurance. Its also quicker/easier for me to refund.
Not that you'll have to worry, because it works 100%.
Not that you'll have to worry, because it works 100%.
Last edited by turboeco; Apr 2, 2008 at 09:58 PM. Reason: Automerged Doublepost
Stage 3 is an upgrade from Stage 2.
It requires the Stage 2 supercharger hub and GM Stage kit 42# injectors. You can run either the Stage 2 77.9mm pulley, or the Stage 3 76mm pulley with this PCM.
This PCM is just like the Stage 2 tune but has some other neat little features. It has an adjustable rev limiter that you set, 6500-8000rpm. There is a special 100octance mode, with more agressive air/fuel/timing. Lastly this PCM has a nitrous algorithm, that allows full control of a 50shot dry nitrous kit. There are two wires that will wire into the PCM from you nitrous solenoid. For safety measure your computer will make sure a list of requirements have been met, for example that you are under WOT and above 3500 rpm, it will also shut the nitrous off 500 rpm before redline automatically. Nice features like that, make it great if you plan on running a bottle! All these modes are activated through your steering wheel buttons.
You can go to www.crateenginedepot.com, cobalt performance parts, Stage 3 FAQ, for a more in depth look.
Anything else just ask!
It requires the Stage 2 supercharger hub and GM Stage kit 42# injectors. You can run either the Stage 2 77.9mm pulley, or the Stage 3 76mm pulley with this PCM.
This PCM is just like the Stage 2 tune but has some other neat little features. It has an adjustable rev limiter that you set, 6500-8000rpm. There is a special 100octance mode, with more agressive air/fuel/timing. Lastly this PCM has a nitrous algorithm, that allows full control of a 50shot dry nitrous kit. There are two wires that will wire into the PCM from you nitrous solenoid. For safety measure your computer will make sure a list of requirements have been met, for example that you are under WOT and above 3500 rpm, it will also shut the nitrous off 500 rpm before redline automatically. Nice features like that, make it great if you plan on running a bottle! All these modes are activated through your steering wheel buttons.
You can go to www.crateenginedepot.com, cobalt performance parts, Stage 3 FAQ, for a more in depth look.
Anything else just ask!
You will need the GM hub and a stage 2 or 3 pulley. Talk to Nate at SmoothFlow for a great deal on the GM hub/pulley.
You will also need the GM Stage kit 42# injectors. Look in the classifieds, there is a guy selling them for $100.
Lastly a GM Stage 2 belt, which can be found at ZZP, Intense, Crate Engine Depot. They are around $45.
Thats all that is required to run this kit, any other questions please ask.
You will also need the GM Stage kit 42# injectors. Look in the classifieds, there is a guy selling them for $100.
Lastly a GM Stage 2 belt, which can be found at ZZP, Intense, Crate Engine Depot. They are around $45.
Thats all that is required to run this kit, any other questions please ask.