For Sale Harrop TVS Supercharger (HTV1320-LSJ)
Harrop TVS Supercharger (HTV1320-LSJ)+More.
Here is a great deal for anyone looking for a direct swap for their M62. Increased airflow (TVS 1.3L vs. M62 1.0L) and power will be a great starting place for a first time or even an advanced enthusiast to start modding there vehicle.
I originally purchased this from OTTP: http://www.ottperformance.com/store/...rger-12p13.htm
3.14" (80mm) Pulley included
Stage 2 belt Included.
I'm Only selling this because i need the cash to pay some bills/ back to stock to trade the balt in.
I'm asking for $1850+shipping.
I used the TVS for only 70 Miles then i noticed a small defect in the cast from the manufacture.
I contacted the vendor and they were more than willing to remedy the issue.
Harrop warranted the defect and i sent it to PSE Superchargers http://www.pse.us/ for Repair and they Inspected and Epoxied the small cast crack in the vacuum line port. The defect was in a non-stress area of the charger on the inlet side, so no welding necessary.
They just epoxied it to repair it and ensure it would not open at all. It is the non pressure/stress side of the charger so there would be no issues with operation.
I didn't have any problems/issues with the TVS i just got it repaired because it was under warranty cause i could.
Pics are up
I originally purchased this from OTTP: http://www.ottperformance.com/store/...rger-12p13.htm
3.14" (80mm) Pulley included
Stage 2 belt Included.
I'm Only selling this because i need the cash to pay some bills/ back to stock to trade the balt in.
I'm asking for $1850+shipping.
I used the TVS for only 70 Miles then i noticed a small defect in the cast from the manufacture.
I contacted the vendor and they were more than willing to remedy the issue.
Harrop warranted the defect and i sent it to PSE Superchargers http://www.pse.us/ for Repair and they Inspected and Epoxied the small cast crack in the vacuum line port. The defect was in a non-stress area of the charger on the inlet side, so no welding necessary.
They just epoxied it to repair it and ensure it would not open at all. It is the non pressure/stress side of the charger so there would be no issues with operation.
I didn't have any problems/issues with the TVS i just got it repaired because it was under warranty cause i could.
Pics are up
Last edited by XenSS06; Apr 4, 2010 at 04:54 PM. Reason: Automerged Doublepost
. Bump bump.
- 60# Injectors + Harness
- Stage II belt
- Base Tune
- (Optional but should have a AFR gauge)
I have the base tune from OTTP which is set for a stock 06 ss/sc.
The only thing is that the pulse table will need to be fine tuned to get rid of a very small misfire that you cant even feel but keeps setting of the random misfire cel, i feel bigger misfires on my stock tune than i did with this tune. I talked to OTTP and they said that i just needed to adjust the pulse table.
Im selling everything i had for my setup i just haven't had a chance to take pics/price and post it yet.
- Innovate AFR gauge
- ZZP 3 gauge piller
- Aeroforce Interceptor
- Ingalls Torque Damper
- ZZP Header/DP Combo (1.75" Primaries>3"DP>2.5" stock exit)
Last edited by XenSS06; Apr 3, 2010 at 12:26 PM.
Senior Member
Joined: 09-28-06
Posts: 905
Likes: 0
From: Anderson, SC
how much were you looking to get for these?
# Innovate AFR gauge
# ZZP 3 gauge piller
# Aeroforce Interceptor
and is the interceptor a dual gauge or single
# Innovate AFR gauge
# ZZP 3 gauge piller
# Aeroforce Interceptor
and is the interceptor a dual gauge or single
Last edited by bluechevycobaltss; Apr 4, 2010 at 07:23 AM. Reason: Automerged Doublepost
Innovate XD-16: $275+shipping
Interceptor SS Edition (Black Face/Red Light): $200+shipping
ZZP Trip Pod: $70+shipping
I also have a 3" RAW CAI that i might be selling pending reassy of my airbox.
Last edited by XenSS06; Apr 4, 2010 at 04:51 PM. Reason: Automerged Doublepost
