For Sale HUGE PART OUT come quick
Thread Starter
Senior Member
Joined: 06-11-09
Posts: 636
Likes: 0
From: Iowa
HUGE PART OUT come quick
OK guys as tittle says its a HUGE CLEAN OUT
port and polished supercharger red and ported to ls4 and polished to glass 350 shipped
intake manifold with endplate dual pass 250shipped
80lbs injectors and harness SOLD
SS/SC interceptor scan Gauge 180
Hurst short throw 75 shipped
2.6 pulley and hub from zzp 60 shipped
Ls4 tb 100 shipped
I have a built lsj engine sitting in my garage
Diamond Forged Pistons 2.0L LSJ
ARP Ecotec Head Studs
Cometic MLS Head Gasket 2.0L
Supertech 78lb Valve Spring Kit
Supertech Ecotec Stainless/Inconel Valves
Total Seal Piston Rings For Diamond Pistons
Darton Ecotec Sleeve Kit
CARRILLO Super A-Beam Connecting Rod Set LSJ 2.0L
Also i didnt put the motor togather Ricks Automotive did down here in tucson with the help of a ASE certified friend taylor. I didnt really think i was going to sell the car or motor so i didnt take a video but you have my word and ill even return your money if the motor doesnt work.
sorry its all put back togather so im not sure what i can and cant prove without tearing it apart which is something i really dont want to do but i do have good feedback through here so.. the Parts alone cost me a arm and a leg and i bought a part about every pay check since i didnt have 4000k to dump at once plus engine was toast when i bought it for 1000 lmk selling engine for 2500+shipping FIRM on price had someone offer me 1500 and stock working lsjs are 2500 which is what im asking so dont even bother
JUST for my friends the car is soon being sold i have a 2500 dollar car that is soon to run low 12s and then 11 and 10s from there. I really dont care for a FWD platform and need money rather bad at this point which is why prices are what they are.
PAYPAL is zipstick101@yahoo.com
Motor is first come first serve basis
port and polished supercharger red and ported to ls4 and polished to glass 350 shipped
intake manifold with endplate dual pass 250shipped
80lbs injectors and harness SOLD
SS/SC interceptor scan Gauge 180
Hurst short throw 75 shipped
2.6 pulley and hub from zzp 60 shipped
Ls4 tb 100 shipped
I have a built lsj engine sitting in my garage
Diamond Forged Pistons 2.0L LSJ
ARP Ecotec Head Studs
Cometic MLS Head Gasket 2.0L
Supertech 78lb Valve Spring Kit
Supertech Ecotec Stainless/Inconel Valves
Total Seal Piston Rings For Diamond Pistons
Darton Ecotec Sleeve Kit
CARRILLO Super A-Beam Connecting Rod Set LSJ 2.0L
Also i didnt put the motor togather Ricks Automotive did down here in tucson with the help of a ASE certified friend taylor. I didnt really think i was going to sell the car or motor so i didnt take a video but you have my word and ill even return your money if the motor doesnt work.
sorry its all put back togather so im not sure what i can and cant prove without tearing it apart which is something i really dont want to do but i do have good feedback through here so.. the Parts alone cost me a arm and a leg and i bought a part about every pay check since i didnt have 4000k to dump at once plus engine was toast when i bought it for 1000 lmk selling engine for 2500+shipping FIRM on price had someone offer me 1500 and stock working lsjs are 2500 which is what im asking so dont even bother
JUST for my friends the car is soon being sold i have a 2500 dollar car that is soon to run low 12s and then 11 and 10s from there. I really dont care for a FWD platform and need money rather bad at this point which is why prices are what they are.
PAYPAL is zipstick101@yahoo.com
Motor is first come first serve basis
Last edited by Winkdogydog101; May 25, 2010 at 03:04 PM.
New Member
Joined: 04-30-09
Posts: 10
Likes: 0
From: NC
When i see "part out" i'm hoping to find a wrecked car that someone is really parting out. All i'm finding is people selling their aftermarket stuff. 
Please call it "parts for sell", since that won't sound like you are really parting a car out.
Please call it "parts for sell", since that won't sound like you are really parting a car out.
i posted first and got cash in hand
Stoon. Local delivery or pick-up is soooo much easier... 
Thread Starter
Senior Member
Joined: 06-11-09
Posts: 636
Likes: 0
From: Iowa
ghost ill do you if you can give me your stock one.
Also yea i got scammed shipping through usps to canada because they wont provide tracking but ill go through ups if you pay shipping
also added a engine build up there.
Also yea i got scammed shipping through usps to canada because they wont provide tracking but ill go through ups if you pay shipping
also added a engine build up there.
I'd do the swap out no problem Wink.
Only problem is that I live in Mesa & the car is non-op right now while I am putting it back together (bought it wrecked,) so it would depend on you how & if you want to do the deal with me. If you come up to the valley at all, I could have the shifter ready to go.
Only problem is that I live in Mesa & the car is non-op right now while I am putting it back together (bought it wrecked,) so it would depend on you how & if you want to do the deal with me. If you come up to the valley at all, I could have the shifter ready to go.
New Member
Joined: 02-24-10
Posts: 142
Likes: 0
From: ILLINOIS
i would have bought the motor from you if i would of known about a month ago. i just bought one. im interested in the ls4 throttle body. will u take a trade for a stock lsj throttle body and some cash? pm me
Thread Starter
Senior Member
Joined: 06-11-09
Posts: 636
Likes: 0
From: Iowa
bump want money for my new project everything is now obo
no im selling the car and i already have a stocker kept mine
no im selling the car and i already have a stocker kept mine
Last edited by Winkdogydog101; May 18, 2010 at 12:44 PM. Reason: Automerged Doublepost