Mark this thread as Unsold
LNF Everything For Sale!!!
#1
LNF Everything For Sale!!!
The LDK is in and everything left is for sale. What you see is available. I haven't pulled anything apart yet. I'll start soon though, tonight or early next week. Thought I'd put this out there so if you have a need you can make an offer. I can pull things individually if needed. The engine was replaced due to a "porous" block. It never overheated nor did the reservoir totally empty. It started drinking coolant by the quart on my way home from work. Therefore, the block is shot but everything else should be good. The tstat housing and pipe are already gone.
Details
Location: AZ
Miles: 71800
Price: Best Offer for now. Will start pulling and posting individual pictures later.
Disclosure: There may be something wonky inside the VC. I haven't opened it yet. It started making a ticking noise at 4000+rpm. Thought it was turbo/heat shields but the old turbo on the new engine sounds fine and none of the shields were loose. The valves are pretty coked so that may have been the cause.
Details
Location: AZ
Miles: 71800
Price: Best Offer for now. Will start pulling and posting individual pictures later.
Disclosure: There may be something wonky inside the VC. I haven't opened it yet. It started making a ticking noise at 4000+rpm. Thought it was turbo/heat shields but the old turbo on the new engine sounds fine and none of the shields were loose. The valves are pretty coked so that may have been the cause.
#7
I started disassembling the engine yesterday. I'm guessing at many of these prices, so they're flexible. Everything comes with bolts. The gross looking oil is what it looks like when coolant mixes with oil. It only drove ~10 miles mixed like this.
Valve cover in great shape: $70+shipping
Tensioner: $5+shipping
Timing chain guides/tensioner: $5?+shipping
Lower timing chain cover: $50+shipping
Crank pulley and bolt: $25+shipping
Full head. $200+shipping. Everything is still attached including cam phasers. The only issue with it is that I destroyed the plastic cover on the intake cam phaser trying to pull it off (I figured it out so I don't need the lectures). I can part if requested, but it would be nice to keep it whole.
Cam actuator solenoids. $10each+shipping
Knock sensor: $5+shipping
IM brace: $5+shipping
Dipstick & tube: $20+shipping
Cam cover thing: $5?+shipping
Camshaft position sensor: $15+shipping (2 available)
Oil cooler: $15+shipping
High pressure fuel pump (HPFP). The stupid thing fell on the floor when I was taking it out and landed on the round cover. You can see the dent in the photo. It's not as bad as the picture looks, but it's definitely there. I don't know the inner workings of it so I can't say for sure it the function is affected. Maybe someone can chime in, or we can work something out. $40+shipping
Ignition coils: $10each or all for $30+shipping
More pictures to come when the head comes off. If you want something from the bottom end you can call dibs on here. I'm debating whether or not I'm keeping the rods.
Valve cover in great shape: $70+shipping
Tensioner: $5+shipping
Timing chain guides/tensioner: $5?+shipping
Lower timing chain cover: $50+shipping
Crank pulley and bolt: $25+shipping
Full head. $200+shipping. Everything is still attached including cam phasers. The only issue with it is that I destroyed the plastic cover on the intake cam phaser trying to pull it off (I figured it out so I don't need the lectures). I can part if requested, but it would be nice to keep it whole.
Cam actuator solenoids. $10each+shipping
Knock sensor: $5+shipping
IM brace: $5+shipping
Dipstick & tube: $20+shipping
Cam cover thing: $5?+shipping
Camshaft position sensor: $15+shipping (2 available)
Oil cooler: $15+shipping
High pressure fuel pump (HPFP). The stupid thing fell on the floor when I was taking it out and landed on the round cover. You can see the dent in the photo. It's not as bad as the picture looks, but it's definitely there. I don't know the inner workings of it so I can't say for sure it the function is affected. Maybe someone can chime in, or we can work something out. $40+shipping
Ignition coils: $10each or all for $30+shipping
More pictures to come when the head comes off. If you want something from the bottom end you can call dibs on here. I'm debating whether or not I'm keeping the rods.
#25
Update!
Valve cover in great shape: Sold
Tensioner: $5+shipping
Timing chain guides/tensioner: $5?+shipping
Lower timing chain cover: $50+shipping
Crank pulley and bolt: $25+shipping
Full head. $200+shipping. Everything is still attached including cam phasers. The only issue with it is that I destroyed the plastic cover on the intake cam phaser trying to pull it off (I figured it out so I don't need the lectures). I can part if requested, but it would be nice to keep it whole.
Cam actuator solenoids. Sold
Knock sensor: $5+shipping
IM brace: $5+shipping
Dipstick & tube: $20+shipping
Cam cover thing: $5?+shipping
Camshaft position sensor: $15+shipping (2 available)
Oil cooler: $15+shipping
High pressure fuel pump (HPFP): Sold
Ignition coils: $10each or all for $30+shipping
More pictures to come when the head comes off. If you want something from the bottom end you can call dibs on here. I'm debating whether or not I'm keeping the rods.
Valve cover in great shape: Sold
Tensioner: $5+shipping
Timing chain guides/tensioner: $5?+shipping
Lower timing chain cover: $50+shipping
Crank pulley and bolt: $25+shipping
Full head. $200+shipping. Everything is still attached including cam phasers. The only issue with it is that I destroyed the plastic cover on the intake cam phaser trying to pull it off (I figured it out so I don't need the lectures). I can part if requested, but it would be nice to keep it whole.
Cam actuator solenoids. Sold
Knock sensor: $5+shipping
IM brace: $5+shipping
Dipstick & tube: $20+shipping
Cam cover thing: $5?+shipping
Camshaft position sensor: $15+shipping (2 available)
Oil cooler: $15+shipping
High pressure fuel pump (HPFP): Sold
Ignition coils: $10each or all for $30+shipping
More pictures to come when the head comes off. If you want something from the bottom end you can call dibs on here. I'm debating whether or not I'm keeping the rods.