Mark this thread as Unsold
Wanted Retrofits
#26
Senior Member
Thread Starter
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
if i buy the pnp retorfit kit from 3bspec how hard is that if i have never done this before. i may take mine apart to paint and figured if it wasnt impossible i would try it, or if i can grab some extra headlights ill do it anyways.
#27
Senior Member
iTrader: (-1)
Join Date: 01-12-07
Location: Illinois
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Gestapo--yes you will need those, better shrouds because those wont cover much, headlights , a wiring harness and an HID kit. Then you have to aim the projectors in the reflector housings. Its actually pretty straight forward but takes time and some finesse.
Maupin-- the pnp retrofit kit isnt to bad and should be pretty easy to install. it just looks a little plain and io would worry about it moving around because of the way you install it.
Maupin-- the pnp retrofit kit isnt to bad and should be pretty easy to install. it just looks a little plain and io would worry about it moving around because of the way you install it.
#28
Senior Member
Thread Starter
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
[/Quote]Maupin-- the pnp retrofit kit isnt to bad and should be pretty easy to install. it just looks a little plain and io would worry about it moving around because of the way you install it.[/QUOTE]
what projectors are the easiest to mount in the stock holes without cutting are those the easiest. I think im going to get those and try bc anything is better than what if got i could retrofit a f$^%^&# shake and go flash light in and it would be brighter than mine
what projectors are the easiest to mount in the stock holes without cutting are those the easiest. I think im going to get those and try bc anything is better than what if got i could retrofit a f$^%^&# shake and go flash light in and it would be brighter than mine
#30
Senior Member
iTrader: (-1)
Join Date: 01-12-07
Location: Illinois
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
as for any retrofit your gonna have to cut into the reflector housing to get it to fit. But i dont think you have to with 3bspec's kit.
Thanks glen just let me know if you have any questions or concerns when installing them.
Thanks glen just let me know if you have any questions or concerns when installing them.
#35
Haz l33t wheelz.
They're BMW shrouds, i can't remember which kind, sorry.
Everything, harness, bulbs, ignitors, ballasts etc. That's why they're so expensive. Just plug and play to the stock system.
Everything, harness, bulbs, ignitors, ballasts etc. That's why they're so expensive. Just plug and play to the stock system.
Last edited by ls1fbody; 02-23-2010 at 07:04 PM. Reason: Automerged Doublepost
#39
Haz l33t wheelz.
Yep, they're so worth it though.
I want to change mine out to a stock housing because the Anzio's fit like straight up ass.
Check out the huge gap between the bumper and the part of the light where it starts to curve up towards the fender...
I want to change mine out to a stock housing because the Anzio's fit like straight up ass.
Check out the huge gap between the bumper and the part of the light where it starts to curve up towards the fender...
#45
Senior Member
Thread Starter
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
ok well ls1 i really want to buy yours....i think i can afford them but if they dont fit rght how can i pa 700 dollars. im in love with your look with the flat black shrouds they are so amazing.
#46
Haz l33t wheelz.
they fit haha, just not perfect. I'm gonna be honest if you're paying that much.
Because of the black, you really cannot tell unless you're right up next to the car, or know what to look for at certain angles.
Because of the black, you really cannot tell unless you're right up next to the car, or know what to look for at certain angles.
#47
Senior Member
Thread Starter
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Ok well I will check finances. I sold my 2.2 rims and some spare tires for 500so ill see what I can muster up. I've got a 650 dollar indash with ipod cord sitting here with all the wiring for a cobalt that needs to sell also
#48
Senior Member
Thread Starter
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
and for the time being if theres gaps in ligth output could i have possible gotten stuff on my silverstars? if i clean them with rubbing alcohol will that help i have three sets of bulbs i can try as well.