Hey guys, I bought the 06 throttle body with a 8 pin. I have an 08 with an 6 pin. I need to get a harness/adapter that I can connect two together with, or someone to swap with. Let me know
Thanks

 

...BuMp

 

i have a harness from a 2.4 throttle body

 

Still in need

 

even a link to one would help

 

Pin D (Purple): TP Sensor 2 Signal
Pin E (Yellow): TAC Motor control 1
Pin F (Brown): TAC Motor control 2
Pin G (Gray): 5-Volt Ref 1
Pin H (Black/White): Low Reference

6-Pin
Pin A (Brown): TAC Motor control 2
Pin B (Yellow): TAC Motor control 1
Pin C (Tan): Low Reference
Pin D (Dark Green): TP Sensor 1 Signal
Pin E (Gray): 5-Volt Reference
Pin F (Purple): TP Sensor 2 Signal



8-Pin >>> 6 Pin

A > D (Dark Green)
B > E (Gray)
C > C (Tan)
D > F (Purple)
E > B (Yellow)
F > A (Brown)
G > E (Gray)
H > C (Tan)

B/G both go to Pin E (Gray)
C/H both go to Pin C (Tan)


theres a diagram i guess you could say showing how to rewire it... just in case you would consider it

 

well how do I get 6 pins to 8 pins

 

zzp will well you an 8 pin harness for like 30 bucks, then just rewire it using the above diagram