Mark this thread as Unsold
For Sale Tvs,header/dp,interceptor,3 pillar,tool box
Tvs,header/dp,interceptor,3 pillar,tool box
Here is what i have. (Shipping Not Included)
I will update with the rest of the pictures tomorrow, im at work now.
================================================== ========
Direct swap for their M62. Increased airflow (TVS 1.3L vs. M62 1.0L) and power will be a great starting place for a first time or even an advanced enthusiast to start modding there vehicle.
I originally purchased this from OTTP: http://www.ottperformance.com/store/...rger-12p13.htm
3.14" (80mm) Pulley included
Stage 2 belt Included.
I'm Only selling this because i need the cash to pay some bills/ back to stock to trade the balt in.
I'm asking for $1500+shipping.
I used the TVS for only 70 Miles then i noticed a small defect in the cast from the manufacture.
I contacted the vendor and they were more than willing to remedy the issue.
Harrop warranted the defect and i sent it to PSE Superchargers http://www.pse.us/ for Repair and they Inspected and Epoxied the small cast crack in the vacuum line port. The defect was in a non-stress area of the charger on the inlet side, so no welding necessary.
They just epoxied it to repair it and ensure it would not open at all. It is the non pressure/stress side of the charger so there would be no issues with operation.
I didn't have any problems/issues with the TVS i just got it repaired because it was under warranty cause i could.
- Harrop TVS Supercharger (HTV1320-LSJ) $1500+shipping (Sold)
- ZZP Header/DP Combo (1.75" Primaries>3"DP>2.5" stock exit) $360+shipping
- Interceptor SS Edition (Black Face/Red Light): $170+shipping (Sold)
- ZZP Trip Pod: $50+shipping
- 2006 Service Manuals 100+shipping
- Snap On Tool Box 2850+Shipping
- Hp Tuners Pro VCM Suite 550+Shipping (6 credits)
I will update with the rest of the pictures tomorrow, im at work now.
================================================== ========
Direct swap for their M62. Increased airflow (TVS 1.3L vs. M62 1.0L) and power will be a great starting place for a first time or even an advanced enthusiast to start modding there vehicle.
I originally purchased this from OTTP: http://www.ottperformance.com/store/...rger-12p13.htm
3.14" (80mm) Pulley included
Stage 2 belt Included.
I'm Only selling this because i need the cash to pay some bills/ back to stock to trade the balt in.
I'm asking for $1500+shipping.
I used the TVS for only 70 Miles then i noticed a small defect in the cast from the manufacture.
I contacted the vendor and they were more than willing to remedy the issue.
Harrop warranted the defect and i sent it to PSE Superchargers http://www.pse.us/ for Repair and they Inspected and Epoxied the small cast crack in the vacuum line port. The defect was in a non-stress area of the charger on the inlet side, so no welding necessary.
They just epoxied it to repair it and ensure it would not open at all. It is the non pressure/stress side of the charger so there would be no issues with operation.
I didn't have any problems/issues with the TVS i just got it repaired because it was under warranty cause i could.
Last edited by XenSS06; May 28, 2010 at 09:15 PM.
interested in headerDP combo, is this stainless or mild steel? also i noticed there is an option for auto tranny or manual tranny with this combo, does it matter which one? only ask cuz i have an auto
I'm not getting rid of it because i didnt like it? I just dont have the car any more.
Replied
Mild, Manual
I'm not sure if it matters you would have to ask zzp sorry.
AM bump
Replied
I'm not sure if it matters you would have to ask zzp sorry.
AM bump
Last edited by XenSS06; May 21, 2010 at 07:57 AM. Reason: Automerged Doublepost
