Mark this thread as Unsold
WTB: S/C Items
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
WTB: S/C Items Gasket only now....Edit below
Hey I bought a Cobalt Charger off Ebay.
Unfortunately I need the following, preferably from the same person:
Stock pulley.
Stock belt for comparison to others that I may use.
Stock tensioner(s).
Stock TB. (this type has no wire control does it I.E. ECU controlled?) <<May make custom adaptor
Sensor thing on top of intake past throttle(did search wasnt sure on what it was though?)
Bypass actuator.
*EDIT* Circled is what I need. Cant see the tensioner but need it too......
All items will need a shipping quote to:
4817 QLD Australia.
Perhaps someones got some just sitting there and they want to get rid of them cheap and get them out of their garage?
I have Paypal.
Please be patient with me getting back to you with PM's...
Thanks
*EDIT*
All Items found Bar the SC/intake manifold gasket!
Unfortunately I need the following, preferably from the same person:
Stock pulley.
Stock belt for comparison to others that I may use.
Stock tensioner(s).
Stock TB. (this type has no wire control does it I.E. ECU controlled?) <<May make custom adaptor
Sensor thing on top of intake past throttle(did search wasnt sure on what it was though?)
Bypass actuator.
*EDIT* Circled is what I need. Cant see the tensioner but need it too......
All items will need a shipping quote to:
4817 QLD Australia.
Perhaps someones got some just sitting there and they want to get rid of them cheap and get them out of their garage?
I have Paypal.
Please be patient with me getting back to you with PM's...
Thanks
*EDIT*
All Items found Bar the SC/intake manifold gasket!
Last edited by 3zercrowd; Jan 24, 2009 at 01:08 AM. Reason: Found parts...
Hey I just bought a wrecked Cobalt SS/SC Im gonna part it out completely.
I have pulley, belt, and stock pcm if you need them, the rest should be on the other one thats coming.
PM if you are interested.
I have pulley, belt, and stock pcm if you need them, the rest should be on the other one thats coming.
PM if you are interested.
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Pic added......thanks to Raulito I may have everything at once pending delivery of his wreck....
Last edited by 3zercrowd; Jan 12, 2009 at 12:50 AM.
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Bump......Any updates on your wreck mate?
2 PM's sent to you.....
I have the money just sitting waiting.....all I need, is all the parts above.....
NYbull05... your my current 2nd choice for just the belt and pulley IF Raulito falls through.....hoping not......
AND will somebody please just tell me WTF this is on top of the charger FFS!???>>
Nobodys answered me since the time ive posted the above pics up on my wanted thread!!
AND YES, ive done searches but im still not satisfied I know EXACTLY what it is!
Thankyou....
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
top of s/c is the scip sensor (supercharger inlet pressure)
I actually should have a spare one, stock pulley's (like 25 of them) I should also have a stock belt and injectors.
Also I might have the vacuum actuator for the bypass valve as I have take my s/c off and went turbo.
If you can wait til monday I'll go check what I have left.
I actually should have a spare one, stock pulley's (like 25 of them) I should also have a stock belt and injectors.
Also I might have the vacuum actuator for the bypass valve as I have take my s/c off and went turbo.
If you can wait til monday I'll go check what I have left.
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Thankyou for that!
Now I know what it is for sure!
I appreciate your time to post!
If you could help me with the above that would be great!
The reason that I want to get most if not all the stuff off one person, is for reducing shipping costs to Australia!
Top effort on the 12.84@114.90!! Very good MPH!
Now I know what it is for sure!
I appreciate your time to post!
If you could help me with the above that would be great!
The reason that I want to get most if not all the stuff off one person, is for reducing shipping costs to Australia!
Top effort on the 12.84@114.90!! Very good MPH!
thanks man, car is definitly a lot faster, I'm just taking it easy lol. Car is setup for highway pulls anyway, got an rx-7 that'll be this seasons track car.
As for the rest of the parts, I'll see if I can get everything together here, if not whoever has the tensioner and whatnot I can send the stuff to them to ship it in one shipment.
I'll check what I have tomorrow when I go back to work since all my parts are in storage there.
As for the rest of the parts, I'll see if I can get everything together here, if not whoever has the tensioner and whatnot I can send the stuff to them to ship it in one shipment.
I'll check what I have tomorrow when I go back to work since all my parts are in storage there.
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
thanks man, car is definitly a lot faster, I'm just taking it easy lol. Car is setup for highway pulls anyway, got an rx-7 that'll be this seasons track car.
As for the rest of the parts, I'll see if I can get everything together here, if not whoever has the tensioner and whatnot I can send the stuff to them to ship it in one shipment.
I'll check what I have tomorrow when I go back to work since all my parts are in storage there.
As for the rest of the parts, I'll see if I can get everything together here, if not whoever has the tensioner and whatnot I can send the stuff to them to ship it in one shipment.
I'll check what I have tomorrow when I go back to work since all my parts are in storage there.
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Awesome!
All items (except for manifold/SC metal gasket)found pending payment.....
Last edited by 3zercrowd; Jan 24, 2009 at 12:19 AM. Reason: Automerged Doublepost
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Hey guys.
Long time since ive been on.
I may have to hit somebody up about another stock pulley!(if I wreck this one)
I've been trying to get the stock pulley on, but im not sure how far it goes on.
Anyone got a picture of the STOCK pulley installed onto the shaft?
Is the bolt hole flush with the end of the pulley?
Thanks
Long time since ive been on.
I may have to hit somebody up about another stock pulley!(if I wreck this one)
I've been trying to get the stock pulley on, but im not sure how far it goes on.
Anyone got a picture of the STOCK pulley installed onto the shaft?
Is the bolt hole flush with the end of the pulley?
Thanks
Thread Starter
New Member
Joined: 09-20-08
Posts: 35
Likes: 0
From: Townsville, North Queensland Australia
Thread
Thread Starter
Forum
Replies
Last Post
royce777
Parts
27
Sep 28, 2015 07:11 AM