post a pic of you and your ride.
thanks man , did you see the tailight conversion i posted in those pics as well ?
thought about it . . . didn't want it to look like a civic in the end lol
thought about it . . . didn't want it to look like a civic in the end lol
Last edited by jefferyss; Dec 14, 2007 at 01:49 AM. Reason: Automerged Doublepost
Get you some masking tape or green body shop tape, a ruler and a pen. Run tape from both sides of the 3rd brake light all the way down to at least the key hole on each side. Use the ruler to measure how far down on each side you want your letters and mark it with the pen on both sides. Run another strip of tape horizontal to each mark you made so it looks like you have a big H on your trunk. Now go ahead and take off all the old double sided tape off the letters but dont install the new stuff just yet. Take the C and put it on the far left and the T on the far right of that horizontal tape line and mark them. Now if you hold your trunk at a 45 degree angle your letters will be held up by the tape while you put them where you want them and mark the spot for each letter. After that you can put the new double sided tape on (witch takes the longest of everything) and install the letters.
Hope this helps
well heres me and yes i look stoned but i am not.

and an old pic of my car
http://img505.imageshack.us/img505/9...ture023kv7.jpg

and an old pic of my car
http://img505.imageshack.us/img505/9...ture023kv7.jpg















[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]







