Hey guys
#1
New Member
Thread Starter
Hey guys
I bought a supercharger kit off a buddies LSJ to go on my LE5....got these 2 parts I don' know where they go or what I do with them lol.
Long hose with a banjo bolt on one end
Wheres this go? Do i need it? Theres still the sensor in the supercharger (i know i dont plug it into anything or use that sensor), the sensor is stkll in the lsj manifold what does that plug into? What does it read? Iat2?
Long hose with a banjo bolt on one end
Wheres this go? Do i need it? Theres still the sensor in the supercharger (i know i dont plug it into anything or use that sensor), the sensor is stkll in the lsj manifold what does that plug into? What does it read? Iat2?
#2
Senior Member
iTrader: (1)
the steel line goes from the coolant bleed port on the top of the head on the passenger side over to the drivers side where it hooks to a hose to the coolant tank.
the sensor is the barometric pressure sensor, the harness is the injector harness. you wont use either of those, you will need to use the injector harness thats on the le5.
the sensor is the barometric pressure sensor, the harness is the injector harness. you wont use either of those, you will need to use the injector harness thats on the le5.
#3
New Member
Thread Starter
the steel line goes from the coolant bleed port on the top of the head on the passenger side over to the drivers side where it hooks to a hose to the coolant tank.
the sensor is the barometric pressure sensor, the harness is the injector harness. you wont use either of those, you will need to use the injector harness thats on the le5.
the sensor is the barometric pressure sensor, the harness is the injector harness. you wont use either of those, you will need to use the injector harness thats on the le5.
Ok cause i have the LSJ injector harness aswell.....that steel line....does the LE5 have the coolant port on the head that u spoke of?
#5
New Member
Thread Starter
barometric sensor, bracket, and harness do I use that for anything? Or more extra parts?
#7
New Member
Thread Starter
but that' the plan....install all the stuff with what I was sent.....to make sure it works and to turn and then update for looks after.....so all the stuff I have came off the a LSJ
#9
New Member
Thread Starter
or I could do candy red SC and valve cover and get the same plate in black This but a little darker