GROUP BUY - Stainless Steel Engine Bay DRESS UP Parts - MRZ Performance
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
How much for all three pieces to be polished instead of brushed aluminum? I would like to order today, so if you can get back to me when you can it would be much appreciated. Thanks again for a great product!
I'll PM you guys with a quote on these parts
We usually sell online but people are welcomed to pick the parts over here. We are located in St-Georges, Qc. It's about 1h30 south of Quebec city. If you need more info, let me know
PM's have been sent on all custom requests, let me know if you need more information
Last edited by MRZ - RedGTZ; Apr 20, 2007 at 02:55 PM. Reason: Automerged Doublepost
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
We dont have actual picture of these products installed on hand right now but here are some pictures of very similar parts done in the pas by SSC in the past.
These have been take on Doc's Cobalt SS/SC, thanks you for the pics and parts Frank!
Thanks to all members who already joined the group buy!
These have been take on Doc's Cobalt SS/SC, thanks you for the pics and parts Frank!
Thanks to all members who already joined the group buy!
Last edited by MRZ - RedGTZ; Apr 24, 2007 at 02:00 AM.
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
No it wont fit the NA Ecotec's... but you 2.2 and 2.4 guys are next on the list
Yeah, Canadian order have the GST added to the price... the joys of being Canadian
Just replied to you PM
Yeah, Canadian order have the GST added to the price... the joys of being Canadian
Last edited by MRZ - RedGTZ; Apr 24, 2007 at 11:05 PM. Reason: Automerged Doublepost
Senior Member
Joined: 03-23-07
Posts: 14,118
Likes: 0
From: Michigan
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
Member
Joined: 04-19-07
Posts: 364
Likes: 0
From: Anchorage Alaska
Can't wait to dyno my car with new engine dressings! ;0
Will these fit if you have an aftermarket fuel rail? I would assume so, but I'd rather not **** away money just for the sake of testing it.
Will these fit if you have an aftermarket fuel rail? I would assume so, but I'd rather not **** away money just for the sake of testing it.
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
I'll PM you back in a moment sorry for the delay
We received your order, thanks for your purchase with us
We would have to test to see if the fit the aftermarket fuel rails... let me know if you are interested, we will refund the pasrt if they dont fit perfect or modify them to fit your car.
sorry for the delay
Last edited by MRZ - RedGTZ; May 1, 2007 at 04:09 PM. Reason: Automerged Doublepost
New Member
Joined: 09-23-06
Posts: 82
Likes: 0
From: Houston, Texas
Unless you made special arrangements with MRZ. The dress kits will be made all at one time. It stated that in their first post. All kits will be made between May 7th and May 11th. So I wouldn't get too exicited about them showing up at your front door anytime soon.
I had custom 'COBALT SS SUPERCHARGED" door sills done on the last group buy. It took awhile to get them. I can say however that MRZ does good work and it was well worth the wait.
I had custom 'COBALT SS SUPERCHARGED" door sills done on the last group buy. It took awhile to get them. I can say however that MRZ does good work and it was well worth the wait.
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
You guys are right, the products are not in stock as we speak. The parts will be made next week and shipped as soon as they are ready to leave, this should be done before may 14th is everything goes as planned 
Sorry about the delay... this is the small disadvantage of group buys. We do all parts at once and we are alble to give you a better discount on those custom products.
Thanks again to all of you who have joined the group buy
Sorry about the delay... this is the small disadvantage of group buys. We do all parts at once and we are alble to give you a better discount on those custom products.Thanks again to all of you who have joined the group buy
Senior Member
Joined: 01-23-06
Posts: 1,216
Likes: 0
From: Grant Park, Illinois
You guys are right, the products are not in stock as we speak. The parts will be made next week and shipped as soon as they are ready to leave, this should be done before may 14th is everything goes as planned Sorry about the delay... this is the small disadvantage of group buys. We do all parts at once and we are alble to give you a better discount on those custom products.
Thanks again to all of you who have joined the group buy
Sorry about the delay... this is the small disadvantage of group buys. We do all parts at once and we are alble to give you a better discount on those custom products.Thanks again to all of you who have joined the group buy
Senior Member
Joined: 03-23-07
Posts: 14,118
Likes: 0
From: Michigan
Hey i live in michigan but as far as chicago area i dont know but since it has to go through customs and stuff i dont think if they ship on the 14 they will be to you by the 18th unless you pay for the express shipping but then again i still aint sure it will make it there by then i know it takes a few to get through customs hope that helped a little try to PM MRZ it might help
Thread Starter
Banned
Joined: 03-13-06
Posts: 1,018
Likes: 0
From: Canada Qc + USA Me
Let me know if you want to go that way and we'll help you get them in time
