Innovate Wideband LM2 PRICE 2 LOW TO LIST!!!!!
Thread Starter
Senior Member
Joined: 04-07-05
Posts: 753
Likes: 0
From: California
Innovate Wideband LM2 PRICE 2 LOW TO LIST!!!!!
Hi Everyone!
We have 2 Innovate Motorsports Wideband LM2's in stock and I'd like to offer them to two very lucky people at one heck of a discounted price.
If you are interested in the LM2 unit and want a price, please post and I'll PM you a price asap!
Price CANNOT be posted.
Here is some info on the LM2 by Innovate Motorsports:
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
*Patented “Direct Digital” Wideband Technology
*Wideband O2 Compatible with ALL fuel types
*Single or Dual Channel Version Available
*OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
*Log directly to SD card (included)
*Playback log data on screen and/or with powerful LogWorks software (included)
*Large high-contrast graphics LCD
*Built-in RPM converter (direct frequency or with optional inductive clamp)
*4 fully-differential analog inputs
*2 configurable linear analog outputs
*Positive lock connectors for all connections
*Innovate MTS serial IN and OUT
*USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included! P/N: 3806, MSRP $479
Please post here if you would like a price on the LM2 unit. Please make sure to post if you are located in Canada or in the States.
If you are interested in the LM2 unit and want a price, please post and I'll PM you a price asap!
Thanks
-Karo
We have 2 Innovate Motorsports Wideband LM2's in stock and I'd like to offer them to two very lucky people at one heck of a discounted price.
If you are interested in the LM2 unit and want a price, please post and I'll PM you a price asap!
Price CANNOT be posted.
Here is some info on the LM2 by Innovate Motorsports:
LM-2: Digital Air/Fuel Ratio Meter
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
*Patented “Direct Digital” Wideband Technology
*Wideband O2 Compatible with ALL fuel types
*Single or Dual Channel Version Available
*OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
*Log directly to SD card (included)
*Playback log data on screen and/or with powerful LogWorks software (included)
*Large high-contrast graphics LCD
*Built-in RPM converter (direct frequency or with optional inductive clamp)
*4 fully-differential analog inputs
*2 configurable linear analog outputs
*Positive lock connectors for all connections
*Innovate MTS serial IN and OUT
*USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included! P/N: 3806, MSRP $479
Please post here if you would like a price on the LM2 unit. Please make sure to post if you are located in Canada or in the States.
If you are interested in the LM2 unit and want a price, please post and I'll PM you a price asap!
Thanks
-Karo
Thread Starter
Senior Member
Joined: 04-07-05
Posts: 753
Likes: 0
From: California
Thread Starter
Senior Member
Joined: 04-07-05
Posts: 753
Likes: 0
From: California
Thread Starter
Senior Member
Joined: 04-07-05
Posts: 753
Likes: 0
From: California
Thread
Thread Starter
Forum
Replies
Last Post