got it, add yourself to the list. :cool:

1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested

So, you are saying that without a tune maybe 15whp and with a tune over 20whp can be achieved right.

Join us in the the technical thread...

https://www.cobaltss.net/forums/jbodyperformance-121/jbp-2-0l-lsj-triflow-camshafts-gb-tech-thread-40279/

well im still interested but its gotta be 8 to 10 ppl in order to match the price i recived from level zero

for the amount of ppl who indicate that they'll be in the GB if there's 8 ppl, we'll have well over 8 ppl if you just pay. :)

If you and aeballa6 got on the list then we'd be up to a possible 7...

...all it takes is people making the committment

TAKE THE LEAP OF FAITH MY FELLOW BALT

1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more

if we hit 11+ it goes down even more.

after the 1st of the year... i may be interested ebcause right now is not a good time to buy

I updated the list:

1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested (paying after x-mas)
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more
8. JCswoosher2 - Interested
9. SororityDemon - Interested
10. Cobalt SSTuner - Interested
11. BlackSS/SC - Interested
12. Ljavy17 - Interested
13. Sunfirejoe - Interested

JBP, is there any possible way of a discounted price on your valve springs as well to go along with the cams? Just curious, I know that I will need them and maybe some other members will too.

I will also need the valve springs. Let's see a package!!!

ALRIGHT- Were up to 2 so far keep pushing!!!!!! Put the link in your sig to promote it more. The more people that buy the cheaper it is!

Kyle

(Free TTT) :)

Thats what I would like to see as well.

We're always happy to make packages deals for customers. Here's some scenarios:

We have three flavours of springs to choose from:

a) Bates b) JBP c) Ferrea

Facts:
- The Bates and Ferrea are good for up to 9000RPM.
- Bates and Ferrea are dual coil springs
- The JBP Springs are good for up to 7800RPM and are single coil.
- The JBP Springs can fit stock retainers, locks and seals and minor pocketing.
- The Bates/Ferrea require purchasing retainers, locks, spring seats and seals

Packages:
To be honest, what are you looking for? There's so much selection and comparison to do with a 'spring package'. I can work up a package such as this:

PACKAGE A
JBP Springs w/Cam GP - $Discounted Price$

PACKAGE B
Bates Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$

PACKAGE C
Ferrea Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$

Sound good?

go with JBP ones. or which ever is recommended for the cams. which i would think u would say JBP's

Personally, the JBP valve springs would be sufficient enough for me. I don't plan on increasing my rev limiter pass the 7200 mark that it is at now and don't want to have to replace the retainers, etc. I'm just a little nervous with the getting the cams and not valve springs and still running a 7200 rev limiter so thats why I am interested. I think your site says $289 for the valve springs, not sure though. What would you be able to do package A for, would you be discounting the valve springs at all?

Package A is what I'm assuming we're looking for. I don't know if I could swing the Bates or Ferrea price wise with the cams. Maybe if we got 11+, but that's doubtful. I would love to be able to build a solid valvetrain, but I was just planning on having a full P&P head built and installed when I built my own engine block up in the future. This kinda screws with my plans...

EDIT: My vote, A all the way.

Damn sweet deal! Nows for sure the time to buy the set-up. Start sending the cash so we can get the cams at a lower price!!!!!!!:cssNET:

Okay guys, We can reduce the price to $259CDN ($227USD) for the JBP springs. (Package A). The nice things about these springs is that they are ready to rock using the stock valvetrain AND only require minor head modification. Again, this is only for those who purchase cams in conjunction with the GP.

If anyone needs installation tools, (cam gear holding tool, spring compressor tool), we have them available for rental/purchase.

JBP, I'm ready to give my down payment, but is everything still the same with that if you are going to buy the "Packaged" deal of cams and valve springs? Great discount on them too BTW.

would it be wise to go ahead and do head studs and new gasket?

Not sure what you mean? Basically, you buy the cams in the GP, you get the discounted price on the JBP springs.

You're not going that far into the engine... Those parts don't get touched. (unless you're taking the head off for other reasons). As for gaskets, everything gets reused as far as a cam change goes...

Well that answers my question :lol:. Wasn't sure if you had something set-up on your site for the Package deal like you do for the GP. I'll send the $66 now then.