JBP 2.0L LSJ Triflow Camshafts GB
#53
Originally Posted by JBP
I just reviewed our old dyno's done by Player_1. The gains evident are about 15.3WHP with boost-solenoid problems.. There's no doubt that we can hit 20 to 26WHP gain off of our Triflows.
Any mods ppl have done can only compliment this factor.
Any mods ppl have done can only compliment this factor.
So, you are saying that without a tune maybe 15whp and with a tune over 20whp can be achieved right.
#54
Senior Member
Join us in the the technical thread...
https://www.cobaltss.net/forums/jbodyperformance-121/jbp-2-0l-lsj-triflow-camshafts-gb-tech-thread-40279/
https://www.cobaltss.net/forums/jbodyperformance-121/jbp-2-0l-lsj-triflow-camshafts-gb-tech-thread-40279/
#57
Senior Member
If you and aeballa6 got on the list then we'd be up to a possible 7...
...all it takes is people making the committment
TAKE THE LEAP OF FAITH MY FELLOW BALT
...all it takes is people making the committment
TAKE THE LEAP OF FAITH MY FELLOW BALT
#58
Senior Member
1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more
2. Edubs - Paid
3. DTM2188 - Interested
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more
#61
Senior Member
Join Date: 04-23-06
Location: S. Jersey
Posts: 5,165
Likes: 0
Received 0 Likes
on
0 Posts
I updated the list:
1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested (paying after x-mas)
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more
8. JCswoosher2 - Interested
9. SororityDemon - Interested
10. Cobalt SSTuner - Interested
11. BlackSS/SC - Interested
12. Ljavy17 - Interested
13. Sunfirejoe - Interested
1. 97 Z Me Go - Paid
2. Edubs - Paid
3. DTM2188 - Interested (paying after x-mas)
4. bamfnss - Interested
5. CbYellowSS - Possibly Interested
6. aeballa6 - In with 8 or more
7. sunfirejoe - In with 8 or more
8. JCswoosher2 - Interested
9. SororityDemon - Interested
10. Cobalt SSTuner - Interested
11. BlackSS/SC - Interested
12. Ljavy17 - Interested
13. Sunfirejoe - Interested
#62
Senior Member
Join Date: 04-23-06
Location: S. Jersey
Posts: 5,165
Likes: 0
Received 0 Likes
on
0 Posts
JBP, is there any possible way of a discounted price on your valve springs as well to go along with the cams? Just curious, I know that I will need them and maybe some other members will too.
#66
Banned
Thread Starter
Join Date: 07-04-06
Location: Toronto
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
We're always happy to make packages deals for customers. Here's some scenarios:
We have three flavours of springs to choose from:
a) Bates b) JBP c) Ferrea
Facts:
- The Bates and Ferrea are good for up to 9000RPM.
- Bates and Ferrea are dual coil springs
- The JBP Springs are good for up to 7800RPM and are single coil.
- The JBP Springs can fit stock retainers, locks and seals and minor pocketing.
- The Bates/Ferrea require purchasing retainers, locks, spring seats and seals
Packages:
To be honest, what are you looking for? There's so much selection and comparison to do with a 'spring package'. I can work up a package such as this:
PACKAGE A
JBP Springs w/Cam GP - $Discounted Price$
PACKAGE B
Bates Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$
PACKAGE C
Ferrea Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$
Sound good?
We have three flavours of springs to choose from:
a) Bates b) JBP c) Ferrea
Facts:
- The Bates and Ferrea are good for up to 9000RPM.
- Bates and Ferrea are dual coil springs
- The JBP Springs are good for up to 7800RPM and are single coil.
- The JBP Springs can fit stock retainers, locks and seals and minor pocketing.
- The Bates/Ferrea require purchasing retainers, locks, spring seats and seals
Packages:
To be honest, what are you looking for? There's so much selection and comparison to do with a 'spring package'. I can work up a package such as this:
PACKAGE A
JBP Springs w/Cam GP - $Discounted Price$
PACKAGE B
Bates Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$
PACKAGE C
Ferrea Springs, Locks, Retainers, Seats, Seals w/Cam GP - $Discounted Price$
Sound good?
Last edited by JBP; 04-03-2007 at 08:11 AM.
#68
Senior Member
Join Date: 04-23-06
Location: S. Jersey
Posts: 5,165
Likes: 0
Received 0 Likes
on
0 Posts
Personally, the JBP valve springs would be sufficient enough for me. I don't plan on increasing my rev limiter pass the 7200 mark that it is at now and don't want to have to replace the retainers, etc. I'm just a little nervous with the getting the cams and not valve springs and still running a 7200 rev limiter so thats why I am interested. I think your site says $289 for the valve springs, not sure though. What would you be able to do package A for, would you be discounting the valve springs at all?
#69
Senior Member
Package A is what I'm assuming we're looking for. I don't know if I could swing the Bates or Ferrea price wise with the cams. Maybe if we got 11+, but that's doubtful. I would love to be able to build a solid valvetrain, but I was just planning on having a full P&P head built and installed when I built my own engine block up in the future. This kinda screws with my plans...
EDIT: My vote, A all the way.
EDIT: My vote, A all the way.
#71
Banned
Thread Starter
Join Date: 07-04-06
Location: Toronto
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Okay guys, We can reduce the price to $259CDN ($227USD) for the JBP springs. (Package A). The nice things about these springs is that they are ready to rock using the stock valvetrain AND only require minor head modification. Again, this is only for those who purchase cams in conjunction with the GP.
If anyone needs installation tools, (cam gear holding tool, spring compressor tool), we have them available for rental/purchase.
If anyone needs installation tools, (cam gear holding tool, spring compressor tool), we have them available for rental/purchase.
Last edited by JBP; 04-03-2007 at 08:12 AM.
#72
Senior Member
Join Date: 04-23-06
Location: S. Jersey
Posts: 5,165
Likes: 0
Received 0 Likes
on
0 Posts
JBP, I'm ready to give my down payment, but is everything still the same with that if you are going to buy the "Packaged" deal of cams and valve springs? Great discount on them too BTW.
#74
Banned
Thread Starter
Join Date: 07-04-06
Location: Toronto
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DTM2188
JBP, I'm ready to give my down payment, but is everything still the same with that if you are going to buy the "Packaged" deal of cams and valve springs? Great discount on them too BTW.
would it be wise to go ahead and do head studs and new gasket?
#75
Senior Member
Join Date: 04-23-06
Location: S. Jersey
Posts: 5,165
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JBP
Not sure what you mean? Basically, you buy the cams in the GP, you get the discounted price on the JBP springs.