It's the Holiday Season. This year, give the gift of FAST with your favorite N2MB Racing products!

Updated: We decided to throw in FREE SHIPPING for an even better deal. These are best prices we have ever offered. Act fast!


New Products:


WOT Box Window Switch Add-On - $65 - This add-on cable plugs into the side of the WOT Box and adds a full nitrous or water injection window switch to your WOT Box. With 15A output capability, it can drive your nitrous solenoids or water injection pump directly. The output can be programmed to turn on and off at specific RPMs and at a certain throttle threshold. It also automatically shuts off whenever the clutch is down, to prevent spraying during no-lift shifting or launch control. All of the settings can be adjusted using the WOT Box Software. Get a nitrous cable now here: N2MB Racing - WOT Box Window Switch

All our products:


The WOT Box - $169 (Regularly $189) - Everyone should have one. Shave 3 tenths off your quarter-mile or more. Get no-lift shifting and launch control now for only $169. Compatible with ALL Cobalts and MANY other cars!N2MB Racing - WOT Box

Act fast, deals end December 31st, 2009!

Email sales@n2mb.com with any questions. :thumbsup:

Thanks,
Jon

 

Will this work on my SS/TC? haha

Great price!

 

Yes. I have heard of a few guys using it on the SS/TC because they want to be able to control the launch RPM.

 

I have this and I was wondering since it says you have to hold the little button down for it to be activated. Can we just tape it down so it's always activated?

 

You don't have to hold down the button for it to be active. As long as the LED is on, it is active. If you hold down the button for greater than 3 seconds, it will start to change the settings. Where did you read that?

 

maybe that's what i read. let me reread to make sure. one second

 

No problem. You don't need to hold the button. I have mine buried in the fuse box. I never need to touch it unless I am changing the settings. Everything is automatic.

 

I want.

 

Yeah that's what i read, but to get everything set you just plug it into your computer with that cable and it will load the program?

 

You don't have to use your computer, if you don't want. You can set the launch control RPM and no-lift from the box using the button. Or you can set everything using the software and your laptop.

 

There isn't any CD right? Just the box and the cable and I assume once you plug it into the computer to set it the program will open. Curious though which settings are set on it already you said you can switch just by the button?

 

Does the software have Mac support at all?

 

The software and drivers are on our website here:
http://www.n2mb.com/wotboxsoftware

You'll need to install the drivers before plugging in the cable.

Not yet. Sorry. You can run it through vwmare or bootcamp in windows on your mac.

 

my cable just has two serial ends on it. lol i'll need an updated cable. lol tried to load it and i got an error.

 

Does it plug into your computer? If you have a serial port, then you can use a serial to serial cable. It will work. If you need a USB to serial cable, you can get one here:

http://stores.shop.ebay.com/sureelec...LH_TitleDesc=1

 

ok, Still having trouble getting the program to open. downloaded V3.2

 

Just placed my order.

 

What happens when you open it? Does it crash? If so, you need to install microsoft .net framework. See Step 4. http://www.n2mb.com/wotboxsoftware


If the program fails to run or displays an error message and crashes, you may need to install the .NET framework from Microsoft on your computer. This is available from Microsoft for the following operating systems:

* Windows 2000
* Windows XP
* Windows Vista - Not needed, Vista includes .NET Framework.

Got it! Thanks!

 

It says the application failed to initialize properly (0xc0000135)

 

It works on a tc. We ended up shutting off the wot shift feature because it just makes such a huge fireball. But the launch control works great. Great product.

 

That means you need to install the .net framework. It's a Microsoft thing. We can't do anything about it. Just click the links above or in step 4.

Try setting the no-lift shift time to manual mode and 200 ms or less. That will reduce the fireball.

 

ok thanks. I have framework i guess need a updated version.

 

Ok will try in spring car is up for winter.

 

can the shift light and the window switch both be used at the same time

 

No, only one or the other. They use the same output.

Updated: We decided to throw in FREE SHIPPING for an even better deal. These are best prices we have ever offered. Act fast!


sunday night bump....