please guys i need some info here im trying to put my stock suspension back in bc my ksports took a crap on me and i unbolted the top three under the hood but i cant get the 2 larger ones down by the break caliper out i got the nut off but i cant get the bolt out iv tapped it w/ a mallet but i dont wanna ruin the threads if it threads in but theres no hex pattern on the bolt so idk what to do
my friend installed the suspension for me (i helped / watched) it seems easy enough but im stuck here so please help me out guys

i know its onlybeen 5 min but if i posted hot girl pics youed be all over this

i know its onlybeen 5 min but if i posted hot girl pics youed be all over this

 

use a pry bar and get pressure off the shock.

 

The 2 lower ones are splined in iirc - might take a few good whacks to loosen them.

Free tip of the day - don't take the nuts all the way off, spin them back far enough that there is room for the bolt to move but the threads on the end of the bolt are covered, beat on the nut - saves the threads on the bolt. Once you break it loose, take the nut off and your done

 

thanks guys
thats what i figured it was that and i got one side done so far
this is the 1st major thing im doing to my car by my self so its a learning process but its fairly simple and is all going well
the backs are done they were real easy now to the drivers front side which is broke so im not sure how its gonna turn out

ok well im done
but i have a feeling the junkyard i got the stock suspension from gave me 2 different struts bc the drivers side is a good 2 in higher then the passenger side but i got em for 150 and i couldnt be w/o a car for any longer looks like im gonna be ordering some TC struts as soon as i get some money together