the 637hp SRT.... killed...
Thread Starter
Senior Member
Joined: 05-12-06
Posts: 983
Likes: 0
From: HepCat City
I've got some pulls at various stages of mods and performance, the car has a good 60+ dyno pulls on it:
I would do three things, get a AGP wastegate, a MPX Exhaust, and some drag radials and lieghtweight 15 inch wheels... he can have some fun with that...
Ask around a bit, you'll see. Or just wait your turn. 
Hey Hep on the subject of SRT would you have any advice for a guy with a all stock one? My buddy has an all black one and he's wanting to build it up, I doubt to any where near where you are but any help I could pass his way would be great! Thanks in advance.
Hey Hep on the subject of SRT would you have any advice for a guy with a all stock one? My buddy has an all black one and he's wanting to build it up, I doubt to any where near where you are but any help I could pass his way would be great! Thanks in advance.
I would do three things, get a AGP wastegate, a MPX Exhaust, and some drag radials and lieghtweight 15 inch wheels... he can have some fun with that...
Last edited by LittleMT; Aug 19, 2007 at 05:53 PM. Reason: Automerged Doublepost
Senior Member
Joined: 08-12-06
Posts: 12,764
Likes: 1
From: here
I think he already has the Mopar performance waste gate or BOV I'm not sure, where should I tell him is a good place to get this stuff at? And thanks man! + rep given!
Thread Starter
Senior Member
Joined: 05-12-06
Posts: 983
Likes: 0
From: HepCat City
at Modern Performance, he can find them on SRT forums vendor section... Also some motor mounts would be in order...
goddamn some nice numbers right there, still running a stock redline though? with a built motor and cams you should be good to 8k or so. even run a stage III PCM or something to bump up that redline, unless you don't have anyone to hook u up on inspections
Thread Starter
Senior Member
Joined: 05-12-06
Posts: 983
Likes: 0
From: HepCat City
I have a stage 2 PCM and the car goes to 6500rpm, however, I have my shift lite set at 6000 or so, as this works on the street for me, but the dyno operator wasn't aware of that and got off of the gas sooner then he should have...
LSX RWD S/C conversion
iTrader: (2)
Joined: 03-25-05
Posts: 10,450
Likes: 277
From: Maple Ridge, BC, Canada
When I read the title of this thread I too was worried that someone drove over/thru your red SRT. That would have been really sad.
I don't want that to happen ever, even after I get the chance to race you.
I don't want that to happen ever, even after I get the chance to race you.
Thread Starter
Senior Member
Joined: 05-12-06
Posts: 983
Likes: 0
From: HepCat City
heh..
I am hardly a dude....!
honey, the hepkitty is now a kill story somewhere on some Honda board...
hopefully the SRT stays safe.... as well as your awesome machine...
Last edited by LittleMT; Aug 19, 2007 at 06:08 PM. Reason: Automerged Doublepost
Banned
Joined: 09-17-06
Posts: 6,266
Likes: 1
From: between heaven and hell
Senior Member
Joined: 06-01-05
Posts: 3,622
Likes: 0
From: Miami
On a serious note though. Can you really make use of 636whp on a FWD car. Like im not hating just wondering, can you do like a 40mph roll and get traction if so, what are you wheel and tire combination.
New Member
Joined: 08-11-07
Posts: 48
Likes: 0
From: Pennsylvania
haha theres this suburau sti lowered and has a downpipe he dosent really know how to drive the car my mods are as in sig except i have a 2.8 now my friends tell me he is a lil over 300 but not to the wheels do i have a chance on pullin on him from a 2nd at 40 were racin sat night
