HP tuned Cobalt SS T/C & HP tuned TVS Cobalt SS S/C vs Stage 3 SRT-4
YouTube - HP tuned Cobalt SS T/C & HP tuned TVS Cobalt SS S/C vs Stage 3 SRT-4
Me and Marca34 had a stage 3 SRT-4 run in last night, check out the vid |
I hate being overseas. I can't watch it because it has music from Sony Entertainment.
Can you re-upload it without the music? |
That TVS isn't as strong as I thought it would be. Should have run from a dig though.
|
Originally Posted by ralliartist
(Post 5364940)
I hate being overseas. I can't watch it because it has music from Sony Entertainment.
Can you re-upload it without the music? |
really? A neon is that fast at stage 3? How much power are the two cobalts making?
|
Originally Posted by CudaJoe
(Post 5365103)
really? A neon is that fast at stage 3? How much power are the two cobalts making?
|
nice race
|
oh ok thats right, Stage 3 refers to aftermarket turbo. Then I am impressed with the cobalts, lol.
|
my experience with a stage 3 srt-4 didn't go that way at all... lol.. 40 roll - he jumped me a little and gothis rear bumper at my front, but then he had to shift waaaayyyyy before i did and i started walking by from that point on.. hrmm
|
Originally Posted by CudaJoe
(Post 5365103)
really? A neon is that fast at stage 3? How much power are the two cobalts making?
Yeah stage 3 neons power has a pretty big range. When my friend first put on his stage 3 he made around 330whp. Then he put on all sorts of supporting mods including a ton of port work and now he makes 440whp on pump and 460ish on race gas. Nice runs op! |
Originally Posted by jvc06sc
(Post 5365132)
Yeah stage 3 neons power has a pretty big range. When my friend first put on his stage 3 he made around 330whp. Then he put on all sorts of supporting mods including a ton of port work and now he makes 440whp on pump and 460ish on race gas.
Nice runs op! |
Nice video, very well put together!
What pulley is the TVS balt on to be hitting 25 psi?!! Oh and he needs some E85:) Good runs all around though |
Originally Posted by InfraRedline
(Post 5365959)
What pulley is the TVS balt on to be hitting 25 psi?!!
|
I creeped a little and it looks like he is on a 2.7, but I think the stock downpipe
|
2.7 but i have the intake mani spacer and s/c spacer tapped for meth. By redline i see 26-27psi.
Originally Posted by InfraRedline
(Post 5365959)
Nice video, very well put together!
What pulley is the TVS balt on to be hitting 25 psi?!! Oh and he needs some E85:) Good runs all around though |
The boost makes sense with the 1.5" primaries, stock dp (I assume), and 2.5" catback. Seems to pull nicely
|
Im not on stock DP. Its Pacesetter to a 3inch downpipe and magnaflow 2.5 catback. Having those 2 spacers change the boost mostly likely a half a psi. My car was knocking and my front o2 sensor is dead so the car fueling went haywire. I was getting a 11AFR. But im not complaining i held my own.
|
It was a friendly race so no biggie.
|
Originally Posted by Marca34
(Post 5366071)
Im not on stock DP. Its Pacesetter to a 3inch downpipe and magnaflow 2.5 catback. Having those 2 spacers change the boost mostly likely a half a psi. My car was knocking and my front o2 sensor is dead so the car fueling went haywire. I was getting a 11AFR. But im not complaining i held my own.
But it was a good race either way! |
Gonna run a higher meth mix 70/30 and retune and go from there.
|
Damn I was thinking the TC would do better.
|
Remember a stg 3 skittle is a TDO5 not the stock TD04. And if the TC had the 3 bar map sensors and held 22 PSI he could of did better. But hey it was a friendly race to compare.
|
I thought the t/c would have taken the srt-4. Really good race.
|
Originally Posted by ss88
(Post 5366311)
I thought the t/c would have taken the srt-4. Really good race.
|
nice vid.
|
All times are GMT -4. The time now is 07:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands