War Stories Post your racing wins. CobaltSS.net does not support or encourage street racing. Be smart and take it to the track.

My Cobalt vs couple Neon srt-4's

Thread Tools
 
Search this Thread
 
Old Aug 17, 2008 | 05:35 PM
  #26  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by PimpLay2
thats impossible lol

in 1000ft u were at 82mph.... 300feet later your at 103?mph
hilarious isnt it?
Reply
Old Aug 17, 2008 | 05:37 PM
  #27  
04redline0124's Avatar
Senior Member
 
Joined: 07-10-07
Posts: 3,166
Likes: 0
From: West Palm Beach
Originally Posted by CBodnar
whatever you say. paul 411whp cobalt. goes to other dyno's and reads higher. darksun ms3 owner used to be a cobalt owner. same deal. they all say it reads low or normal. so those are well known people. also laloosh ms3 owner. a bunch of others. i can't argue with you as the people who are more well known than me can even tell you. everyone was pushing horrible numbers that day. my balt was hot 4 hours and everything going against me also 99degree's out. horrible.

still pulled 307whp w/o a bottle warmer or w/o touching it or torching it. i'd say impressive knowing the bottle was cold due to a/c on it.

also new dyno #'s are higher with bottle warmers as boy they helped a lot. also the one run you can look at heated it up with a torch the 3rd run and it was 330torque at 3.5k rpm's you can see it was going to be a nice number.

i have all the proof. dyno sheets/pictures/videos/track slips. not sure what else there could be to prove.

also i am still on gm stage 2 tune.

23. QuikSilverSS 257 whp, 232 wtq Verified I, GM2, 2.8

there are other people pushing close to my numbers with just gm stage 2 tune



nice bro. when your loosing by 3-4 cars even if they got the jump you know it is still over even if they gave you a car or two head start.
u have that much torque because ur clutch slipped, and look at EVERYONE else in that dyno thread with ur mods lol they are in the 240's something your not telling us that you have??? You dont have a dyno sheet off bottle, and no offense to anyone else that dynoed there, but there numbers might be inflated also on that dyno.

dynojet or mustang i forgot????
Reply
Old Aug 17, 2008 | 05:37 PM
  #28  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by PimpLay2
thats impossible lol

in 1000ft u were at 82mph.... 300feet later your at 103?mph
r/t... .272
60'... 2.511
330... 6.405
1/8... 9.405
mph... 81.66
1000... 11.981
1/4... 14.134
mph... 102.76

that is just one of the gm stg2 + 2.8 pulley runs i did
Reply
Old Aug 17, 2008 | 05:39 PM
  #29  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by 04redline0124
u have that much torque because ur clutch slipped, and look at EVERYONE else in that dyno thread with ur mods lol they are in the 240's something your not telling us that you have??? You dont have a dyno sheet off bottle, and no offense to anyone else that dynoed there, but there numbers might be inflated also on that dyno.

dynojet or mustang i forgot????
dynojet. also you can say whatever you want. i have my proof. i know what the car can do. i've posted enough info to prove it. and why do we even care about dyno sheets anyways? if nj has a better track come up here and use ours. if nj has better dyno's and the heat is less please your welcome to come use them. no one is stopping you. seems stupid to complain.

people who have dyno'd there went somewhere else and dyno'd higher. nuff said.
Reply
Old Aug 17, 2008 | 05:39 PM
  #30  
PimpLay2's Avatar
Senior Member
 
Joined: 04-29-08
Posts: 2,681
Likes: 0
From: Pittsburgh to D.C.
Originally Posted by CBodnar
r/t... .272
60'... 2.511
330... 6.405
1/8... 9.405
mph... 81.66
1000... 11.981
1/4... 14.134
mph... 102.76

that is just one of the gm stg2 + 2.8 pulley runs i did
81.66mph is how fast you were going at the 1/8 mile mark... not 1000ft

why do you think your quarter mile is 14.1 then AFTER it says 102...

ure 81mph is AFTER 1/8 so therefore its trapping your 1/8 mile time dude
Reply
Old Aug 17, 2008 | 05:39 PM
  #31  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by CBodnar
r/t... .272
60'... 2.511
330... 6.405
1/8... 9.405
mph... 81.66
1000... 11.981
1/4... 14.134
mph... 102.76

that is just one of the gm stg2 + 2.8 pulley runs i did
lmao, so do you know how to read a timeslip? the mph right below the 1/8 IS YOUR 1/8 TRAP. a 2.5 60???
Reply
Old Aug 17, 2008 | 05:40 PM
  #32  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by PimpLay2
81.66mph is how fast you were going at the 1/8 mile mark... not 1000ft

why do you think your quarter mile is 14.1 then AFTER it says 102...

ure 81mph is AFTER 1/8 so therefore its trapping your 1/8 mile time dude
FAIL. i need to go get some sleep. lol
Reply
Old Aug 17, 2008 | 05:40 PM
  #33  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by PimpLay2
81.66mph is how fast you were going at the 1/8 mile mark... not 1000ft

why do you think your quarter mile is 14.1 then AFTER it says 102...

ure 81mph is AFTER 1/8 so therefore its trapping your 1/8 mile time dude
no dumby that means uh... that means.... oh yea that must be his 1500 ft trap
Reply
Old Aug 17, 2008 | 05:41 PM
  #34  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by hatrickstu
lmao, so do you know how to read a timeslip? the mph right below the 1/8 IS YOUR 1/8 TRAP. a 2.5 60???
FAIL.

you asked what my trap was so i said 102 or 103. lol

then you said something else about srt-4's running 80mph or something i forget. so i figured you wanted the lower mph number not the 102 103 number since i already said that.

Reply
Old Aug 17, 2008 | 05:42 PM
  #35  
PimpLay2's Avatar
Senior Member
 
Joined: 04-29-08
Posts: 2,681
Likes: 0
From: Pittsburgh to D.C.
Originally Posted by hatrickstu
lmao, so do you know how to read a timeslip? the mph right below the 1/8 IS YOUR 1/8 TRAP. a 2.5 60???
yea dude with a 2.5 60ft time a 14.1 isnt bad

u should be under 2.2 60ft time then you will see 13's
Reply
Old Aug 17, 2008 | 05:42 PM
  #36  
SLoW SHO's Avatar
Banned
 
Joined: 11-29-06
Posts: 1,935
Likes: 0
From: CT
I raced this super freak s2 Cobalt in my GTO, thinking it was that Turbo 400whp one.

I was so dissapointed Why all the hype? The car isn't something crazy he trapped 102mph. In most of the videos its pretty clear the other people were sleeping on the 3rd honk and/or missing gears.
Reply
Old Aug 17, 2008 | 05:43 PM
  #37  
PimpLay2's Avatar
Senior Member
 
Joined: 04-29-08
Posts: 2,681
Likes: 0
From: Pittsburgh to D.C.
Originally Posted by hatrickstu
no dumby that means uh... that means.... oh yea that must be his 1500 ft trap
lmao ahahahaha
Reply
Old Aug 17, 2008 | 05:43 PM
  #38  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by CBodnar
FAIL.

you asked what my trap was so i said 102 or 103. lol

then you said something else about srt-4's running 80mph or something i forget. so i figured you wanted the lower mph number not the 102 103 number since i already said that.

are you really that dumb? i said the srt's here run 102-105 in the 1000, you said "i run 102 with X mods"

i reply with yea, in the 1/4, i said 1000.

then asked, "what do you run in the 1000?"

in which you replied with 1/8 mph.

again, you have some major reading and learning to do. all you did was make my point even more apparent
Reply
Old Aug 17, 2008 | 05:44 PM
  #39  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by SLoW SHO
I raced this super freak s2 Cobalt in my GTO, thinking it was that Turbo 400whp one.

I was so dissapointed Why all the hype? The car isn't something crazy he trapped 102mph. In most of the videos its pretty clear the other people were sleeping on the 3rd honk and/or missing gears.
thank you. every thread of mine turns into an argument. i just a kid who posted up some video's
Reply
Old Aug 17, 2008 | 05:44 PM
  #40  
04redline0124's Avatar
Senior Member
 
Joined: 07-10-07
Posts: 3,166
Likes: 0
From: West Palm Beach
LOL at stu....and cbodnar, u trapepd 81 in the 1/8th. Thats wut i trapped well 80.XX and i put down 240 whp off bottle, soo wuts up with that??
Reply
Old Aug 17, 2008 | 05:45 PM
  #41  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by SLoW SHO
I raced this super freak s2 Cobalt in my GTO, thinking it was that Turbo 400whp one.

I was so dissapointed Why all the hype? The car isn't something crazy he trapped 102mph. In most of the videos its pretty clear the other people were sleeping on the 3rd honk and/or missing gears.
yea but he picks up 21 mph in the lat 320 feet.
Reply
Old Aug 17, 2008 | 05:45 PM
  #42  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by hatrickstu
are you really that dumb? i said the srt's here run 102-105 in the 1000, you said "i run 102 with X mods"

i reply with yea, in the 1/4, i said 1000.

then asked, "what do you run in the 1000?"

in which you replied with 1/8 mph.

again, you have some major reading and learning to do. all you did was make my point even more apparent
dude, i should go to college. again i said my bad. i read it wrong. and then kept looking past it way too far. lol

my b
Reply
Old Aug 17, 2008 | 05:45 PM
  #43  
04redline0124's Avatar
Senior Member
 
Joined: 07-10-07
Posts: 3,166
Likes: 0
From: West Palm Beach
Originally Posted by CBodnar
dynojet. also you can say whatever you want. i have my proof. i know what the car can do. i've posted enough info to prove it. and why do we even care about dyno sheets anyways? if nj has a better track come up here and use ours. if nj has better dyno's and the heat is less please your welcome to come use them. no one is stopping you. seems stupid to complain.

people who have dyno'd there went somewhere else and dyno'd higher. nuff said.
well there u go its a dynojet!, go to a mustang and well talk about those digits
Reply
Old Aug 17, 2008 | 05:45 PM
  #44  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by 04redline0124
LOL at stu....and cbodnar, u trapepd 81 in the 1/8th. Thats wut i trapped well 80.XX and i put down 240 whp off bottle, soo wuts up with that??
cool i beat you.

that time slip is with gm stage 2 and 2.8 only.
Reply
Old Aug 17, 2008 | 05:46 PM
  #45  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
cool i beat you stock.
Reply
Old Aug 17, 2008 | 05:47 PM
  #46  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by 04redline0124
well there u go its a dynojet!, go to a mustang and well talk about those digits
lol. you don't want to know new numbers my friend. you don't want to know. i don't need to go to anymore dyno's and waste my time. like you told me a long time ago. every dyno reads differently and it is just a number and rough estimate and it doesn't matter. just to see where your around.
Reply
Old Aug 17, 2008 | 05:48 PM
  #47  
hatrickstu's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-03-05
Posts: 15,395
Likes: 0
From: Ar-kan-sas
Originally Posted by CBodnar
lol. you don't want to know new numbers my friend. you don't want to know. i don't need to go to anymore dyno's and waste my time. like you told me a long time ago. every dyno reads differently and it is just a number and rough estimate and it doesn't matter. just to see where your around.
it doesnt even mean that.... it literally means jackshit.
Reply
Old Aug 17, 2008 | 05:48 PM
  #48  
04redline0124's Avatar
Senior Member
 
Joined: 07-10-07
Posts: 3,166
Likes: 0
From: West Palm Beach
Originally Posted by CBodnar
cool i beat you.

that time slip is with gm stage 2 and 2.8 only.
ok mines with stage 2 and a 2.9 wuts ur deal??? see ur dyno reads high..and LMAO ur times are finalyl out in the open now, i will never argue with u again about who is faster, because apparently ur not even close to me on my last setup

ncie talking to you thoe without all the cusswords
and u claim to have the best driver mod and power shifting and all this b/s but a 2.5 60 ft??? lol come on man u trapped 81 XX cuz all u did was spin lol
Reply
Old Aug 17, 2008 | 05:49 PM
  #49  
CBodnar's Avatar
Thread Starter
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
Originally Posted by hatrickstu
cool i beat you stock.
nice, i beat 04 ion's times almost everywhere and he knows it so puts that he beats me in his sig. i sit back and laugh at him on almost every post he makes when it is a non-winning argument for him always.

people know your sig makes no sense what so ever. you never raced me and you don't have the ***** to come race me. your the one who talks **** all the time and starts arguments first and say oh come race me. i don't need to go race you. i've proved all my points already and what my car can do and personally beat most of the times you put down.
Reply
Old Aug 17, 2008 | 05:50 PM
  #50  
04redline0124's Avatar
Senior Member
 
Joined: 07-10-07
Posts: 3,166
Likes: 0
From: West Palm Beach
Originally Posted by hatrickstu
it doesnt even mean that.... it literally means jackshit.
only for tuning, but some read high and low, and some right on to the AVERAGE power level of those certain mods
Reply



All times are GMT -4. The time now is 11:05 PM.