Let's keep ALL info to 17" ONLY wheels which fit SS/TC with NO SPACER.

 

Apparently SS/NA wheels do, but just barely. (According to other members here).

 

I was aware of that actually, but people say it is only by a sheet of paper that it fits. I would be afraid to go that close. Let's try and post only wheels that fit without a spacer and at least 10mm of clearance!

 

oem redline all years 17 inch no spacer and are you kidding 10mm of clearance? stock dont have that much

 

haha, ok 5mm would be acceptable. So you say that redline wheels would clear just fine?

 

I have been in touch with Enkei recently. I talked with a rep named King. He told me there is a new wheel coming out around the end of Sept. and they haven't fully decided if they're going to include our 5X110. He told me if there was enough interest they would build this wheel. It is a race wheel weighing LESS than 16# and priced about the same as the RPF1. Everybody interested in wheels should call this number, ask for King and tell him you want wheels for your Cobalt SS. He also told me the new wheel is being built to clear Brembos and probably in a 17" as well. EVERYBODY GET ON THE PHONE AND TELL YOUR FRIENDS, RELATIVES AND EVEN ENEMIES TO CALL. The more interest we can generate the better our chances. This is a NEW wheel so tooling won't be as big a factor as custom wheels, which they don't want to get involved with. 800-875-3100 CALL

I posted this info on another thread and caught hell.

I have been in touch with Enkei recently. I talked with a rep named King. He told me there is a new wheel coming out around the end of Sept. and they haven't fully decided if they're going to include our 5X110. He told me if there was enough interest they would build this wheel. It is a race wheel weighing LESS than 16# and priced about the same as the RPF1. Everybody interested in wheels should call this number, ask for King and tell him you want wheels for your Cobalt SS. He also told me the new wheel is being built to clear Brembos and probably in a 17" as well. EVERYBODY GET ON THE PHONE AND TELL YOUR FRIENDS, RELATIVES AND EVEN ENEMIES TO CALL. The more interest we can generate the better our chances. This is a NEW wheel so tooling won't be as big a factor as custom wheels, which they don't want to get involved with. 800-875-3100 CALL

I posted this info on another thread and caught hell.

 

Please see my new thread.