I think that's too much offset for the wheels you're getting. I see them looking good on a perfectly flush setup. Maybe 3-5mm of poke, nothing more. It's a sick wheel, but it's gotta be done right or they just won't flow well.

Edit: I should actually say too little offset. Something around +35 would be perfect for that wheel.

 

nope this is a new wheel to there cast line that isnt released yet, they were willing to have it drilled to 5x110 for only a bit more. they come, machined, piano black, gunmetal, and silver. custom finishes are extra


the reason for the +25 is that is what will clear the front suspension setup. +35 on a 9.5 will be way to close upfront

 

 

****, yeah I forgot about that. I think Dom had the same problem with the +30's and pushed them out to +25

 

yeah, thats why i didnt get these reps 9.5 all around, because the fronts wouldnt clear.

 

nues are cast, just not concave.

 

There is a cast concave one that isn't released yet, reason why I'm on the preorder

 

Good offset for 18x8.5?

 

are you wanting poke or just to be flush?

 

That's impossible to answer without knowing what look you're trying to achieve.

 

Oh sorry, forgot to say. I want it to look flush without stretching tires, maybe just tuck a tiny bit. Kinda like how will's car looks.

 

38

 

+30 or +35 either will due for what you want.

+38 is too much IMO

 

ok dumb question i have a set of 18x7.5 +42 what size spacers do i need for a lil poke

thanks in advanced ,new setup coming soon

 

Another wheel noob for you guys.

I want flush with maybe a little poke, would it be better to go like 18x8 with a lower offset or 18x9 with a little higher offset?

 

I've got 19x8.5 +35 and they sit flush. I added 4mm spacers in the rear and they poke just a little bit. My estimate would be 18x9 +35 would be nice or 18x8 +20ish. Correct me if I'm way off guys but I think I'm close. lol

 

I need to clear the brembos as well, i dont think ill have a problem, im looking at Team Dynamics

 

Depends on the wheels. Wider wheels in some cases will give you more of a concave look or more lip. Wide wheels also run into the issue of inner wheels clearance. To run a 9.5" wheel you can't have any more than +25mm of offset.

 

So you think 18x9 +35? I'd like going with 9 wide rather than 8 wide.

 

JUICEEEEEDDD post your car in the offical stanced thread so i can update your car in it lol

 

That won't fit in the front. You'll hit the struts. You need to drop down the +30

 

im quite close to my coilover on a 17x9 +22

 

I have to take some new pics first. Don't have any since I removed the rear lock rings.


Ok my bad on the 18x9 +35. Wasn't sure if that would clear or not in the front which is why I wanted someone to verify.

 

Nothing a grinder couldn't fix!

 

what bout me guys