Cobalt SS Network
Share Your Pictures with Our Community. Upload Now
0 2022/07/04 16:14:52
0 2022/07/03 12:23:25
0 2022/07/03 12:22:37
0 2022/07/03 12:21:23
0 2022/07/02 17:03:29
Uv reactive oil dye showing where the leak is. I know it is low brow, but i am going to use steel stick. This is not worth taking a few days to re weld it. This pan is semi disposable, and I expected there to be issues. I hope to come up with a better design, or do dry sump at some point possibly
Uv reactive oil dye showing where the leak is. I know it is low brow, but i am going to use steel stick. This is not worth taking a few days to re weld it. This pan is semi disposable, and I expected there to be issues. I hope to come up with a better design, or do dry sump at some point possibly
0 2022/07/02 17:03:23
0 2022/07/02 12:16:16
0 2022/07/02 12:16:08
0 2022/07/01 20:13:30
Initial clutch return spring setup. I spend (wasted) an hour or 2 messing with this yesterday, apparently some of the FF cobra guys don't even run them. Some Corvette guys run a tension spring such as this, while most OEM setups seem to cam-over, where they return, but also assist the clutch pedal engaging. I may change this, it is admittedly a half assed solution, but it should be adequate
Initial clutch return spring setup. I spend (wasted) an hour or 2 messing with this yesterday, apparently some of the FF cobra guys don't even run them. Some Corvette guys run a tension spring such as this, while most OEM setups seem to cam-over, where they return, but also assist the clutch pedal engaging. I may change this, it is admittedly a half assed solution, but it should be adequate
0 2022/07/01 20:12:17
0 2022/07/01 11:19:20
0 2022/07/01 11:19:10
Advertisement
0 2022/06/27 11:30:20
Tried an OE clutch, and it drew the fingers to the end of their travel. I consulted the RWD group on Facebook, apparently some people have to run pressure plate spacers. The fidanza flywheel could be off3-4 mm, taking up all of the travel. Ill keep the thread updated, hitting road blocks but learning a ton. I ordered "stand offs" from McMaster, as a gentleman on FB did
Tried an OE clutch, and it drew the fingers to the end of their travel. I consulted the RWD group on Facebook, apparently some people have to run pressure plate spacers. The fidanza flywheel could be off3-4 mm, taking up all of the travel. Ill keep the thread updated, hitting road blocks but learning a ton. I ordered "stand offs" from McMaster, as a gentleman on FB did
0 2022/06/25 17:31:17
0 2022/06/25 10:32:58
0 2022/06/24 06:54:42
0 2022/06/24 06:54:40
0 2022/06/23 11:40:43
0 2022/06/23 11:40:37
0 2022/06/23 11:40:30
0 2022/06/23 10:45:24
0 2022/06/22 16:52:29
0 2022/06/22 16:52:08
0 2022/06/22 16:47:37
0 2022/06/22 16:45:32
0 2022/06/22 16:18:23
0 2022/06/22 16:17:59
Picked this up for a song at ZZP. The price was too good to pass up. Plus i have a nice clean casting to weld some injector bungs on, for staged injection (long term). Gonna sock this away for now, i am excited however
Picked this up for a song at ZZP. The price was too good to pass up. Plus i have a nice clean casting to weld some injector bungs on, for staged injection (long term). Gonna sock this away for now, i am excited however
0 2022/06/22 14:36:46
2+ ckutch disc
2+ ckutch disc
0 2022/06/20 18:27:05
Pressure plate
Pressure plate
0 2022/06/20 18:26:58
Pic i took for spec. The fingers popped back out when i loosened it
Pic i took for spec. The fingers popped back out when i loosened it
0 2022/06/20 18:26:51
3 springs around the perimeter, maybe have something to do with the ratchet mechanism? I have a decent mechanical apitiude and have no idea how these work. Any thoughts?
3 springs around the perimeter, maybe have something to do with the ratchet mechanism? I have a decent mechanical apitiude and have no idea how these work. Any thoughts?
0 2022/06/20 18:26:44
Advertisement