2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

what injector size is ok

Thread Tools
 
Search this Thread
 
Old Mar 8, 2008 | 09:48 AM
  #1  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
what injector size is ok

i was doin some lookin around at different pulley sizes and injector sizes and was wonderin what some of the different setups you guys might be using. any advice would be appreciated

Thanks

Reply
Old Mar 8, 2008 | 09:50 AM
  #2  
Altiery54's Avatar
Banned
 
Joined: 04-01-07
Posts: 7,914
Likes: 0
From: Braidwood, Illinois
42;s = 3.0-2.9, 60's 2.8 and smaller
Reply
Old Mar 8, 2008 | 09:57 AM
  #3  
XM15's Avatar
Senior Member
 
Joined: 05-16-06
Posts: 6,298
Likes: 0
From: CT
^^^What he said.

Altitude will have an effect, but generally speaking a pulley smaller than a 2.9 will probably need 60's.
Reply
Old Mar 8, 2008 | 09:58 AM
  #4  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
Will any type of tunning need to be done to change injectors & pulley? If so what?
Reply
Old Mar 8, 2008 | 09:59 AM
  #5  
Altiery54's Avatar
Banned
 
Joined: 04-01-07
Posts: 7,914
Likes: 0
From: Braidwood, Illinois
Originally Posted by 06 SS SC
Will any type of tunning need to be done to change injectors & pulley? If so what?
if u change pulley/injector size u will def. need 2 get it tuned immediately. via hptuners or taking it 2 a speed shop
Reply
Old Mar 8, 2008 | 10:14 AM
  #6  
shabodah's Avatar
Senior Member
 
Joined: 09-21-06
Posts: 2,270
Likes: 1
From: Midwest
There are 50 and 52# injectors available, too.
Reply
Old Mar 8, 2008 | 10:25 AM
  #7  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
Where Did You Get The 60# Injectors?
Reply
Old Mar 8, 2008 | 10:26 AM
  #8  
Altiery54's Avatar
Banned
 
Joined: 04-01-07
Posts: 7,914
Likes: 0
From: Braidwood, Illinois
http://rebelautoworxs.com/product_in...products_id=35
Reply
Old Mar 8, 2008 | 11:46 AM
  #9  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
Does my stock fuel system support the 60lb injectors or do I have to upgrade any?
Reply
Old Mar 8, 2008 | 12:08 PM
  #10  
etownbalt12's Avatar
New Member
 
Joined: 07-30-07
Posts: 72
Likes: 0
From: Hamilton, New Jersey
It will support it but u'll def have to go with upgraded spark plugs ...step 1 or step 2 colder is good NGK iridium
Reply
Old Mar 8, 2008 | 01:28 PM
  #11  
Immortal Technique's Avatar
Senior Member
 
Joined: 09-18-07
Posts: 535
Likes: 0
From: Southington, CT
Can you piece a kit together if I wanted to use a 2.8 pulley? I was going to PM someone but figured I'd Ask. Please show links
Reply
Old Mar 8, 2008 | 02:15 PM
  #12  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
R.A.W has the 60lb injectors ; harness ; with a 2.79 pulley ....

what's the best thing to use to turn my car??????????????

EDIT: "Tune" not turn my bad
Reply
Old Mar 8, 2008 | 02:17 PM
  #13  
alleycat58's Avatar
Senior Member
 
Joined: 06-08-05
Posts: 18,529
Likes: 1
From: Pittsburgh
Originally Posted by 06 SS SC
R.A.W has the 60lb injectors ; harness ; with a 2.79 pulley ....

what's the best thing to use to turn my car??????????????
I prefer the steering wheel myself......
Reply
Old Mar 8, 2008 | 02:19 PM
  #14  
Witt's Avatar
Senior Member
 
Joined: 03-03-06
Posts: 4,958
Likes: 0
From: Pittsburgh, PA
Originally Posted by alleycat58
I prefer the steering wheel myself......
I agree, works most of the time except at high speed or deep snow.
Reply
Old Mar 8, 2008 | 02:30 PM
  #15  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
best thing to TUNE my car .... "miss type"
Reply
Old Mar 8, 2008 | 02:35 PM
  #16  
M-Dub's Avatar
Senior Member
 
Joined: 12-19-05
Posts: 9,704
Likes: 0
From: Raleigh, NC
42# injectors work fine with 2.80" pulley sizes if you run meth injection!
Reply
Old Mar 9, 2008 | 12:57 PM
  #17  
etownbalt12's Avatar
New Member
 
Joined: 07-30-07
Posts: 72
Likes: 0
From: Hamilton, New Jersey
hp tuners
Reply
Old Mar 9, 2008 | 04:44 PM
  #18  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
Thanks for all the info it really helped me out .
Reply
Old Mar 9, 2008 | 04:54 PM
  #19  
stage2's Avatar
Senior Member
 
Joined: 10-28-07
Posts: 1,715
Likes: 0
From: canada
what would happen if 60lb with 3.00''
Reply
Old Mar 9, 2008 | 07:21 PM
  #20  
06 SS SC's Avatar
Thread Starter
New Member
 
Joined: 12-20-07
Posts: 13
Likes: 0
From: Marshall, NC
shouldn't have any problem with the 60# on a 3" pulley ... just be sure to get it tuned when you make the swap.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sl0wbaltSS
2.0L LNF Performance Tech
18
Nov 21, 2018 11:11 PM
patooyee
2.4L LE5 Performance Tech
50
Oct 15, 2015 05:11 PM
Jesse
Parts
15
Oct 13, 2015 09:32 PM
nathan112i
Featured Car Showcase
41
Sep 30, 2015 07:12 PM
GBRunner24
Featured Car Showcase
3
Sep 26, 2015 06:44 PM




All times are GMT -4. The time now is 03:44 PM.