plug question

Reply Subscribe

Thread Tools

Search this Thread

Oct 26, 2008 | 10:18 PM

arng22

Thread Starter

Senior Member

Joined: 12-02-06

Posts: 806

Likes: 0

From: Hopatcong

plug question

I read up about step 2 colder plugs suggested for 2.6' or smaller pulley would it be wise to have these with a 2.8/2.7 set up with nitrous or just stick with the step 1?

Oct 26, 2008 | 10:19 PM

1badBlueberrySC

Senior Member

Joined: 09-23-08

Posts: 6,621

Likes: 0

From: Raleigh, NC

The BKR7E's are just fine!

Oct 26, 2008 | 10:22 PM

arng22

Thread Starter

Senior Member

Joined: 12-02-06

Posts: 806

Likes: 0

From: Hopatcong

thats the Iridium plugs as well?

Oct 26, 2008 | 10:49 PM

theneelster

Senior Member

Joined: 06-22-08

Posts: 1,320

Likes: 0

From: PA

Quote:

Originally Posted by arng22

I read up about step 2 colder plugs suggested for 2.6' or smaller pulley would it be wise to have these with a 2.8/2.7 set up with nitrous or just stick with the step 1?

I wouldn't run nitrous on anything smaller than a 2.9 but it's your car. 1 steps down to 2.7 or 2.6.

Quote:

Originally Posted by arng22

thats the Iridium plugs as well?

Most people are fine with the coppers because the gap is easier to change.

Last edited by theneelster; Oct 26, 2008 at 10:49 PM. Reason: Automerged Doublepost

Oct 26, 2008 | 10:50 PM

1badBlueberrySC

Senior Member

Joined: 09-23-08

Posts: 6,621

Likes: 0

From: Raleigh, NC

No not the iridium... just your standard everyday copper plug. The same plug most of the higher HP LSJ's are running and I have been running for a year and a half now! Gap at .32-.35