Saw these on gravana...didnt know if anyone has details on them? Any dynos on them? Cams are a def must for all of us, and gears of course!
http://gravanatuning.com/application...ft_Set_Stage_3
Yup...Stage 3...never even seen stage 1 or 2....hopefully if these arent worth crap...stage 1 cams come out soon that have good results

 

There are 5 Comp Cams listed in the Comp Cams Catalog:
http://compcams.com/Technical/Catalogs/NP2006/Page1.jpg
The GMPP cams are quite stout as well.
From what I have heard anything other than Stage 1 will need to be accompanied by tuning.


Scott

 

what GMPP cams?

 

Visit www.TurboTechRacing.com we have the specs on all 5 cam grinds for the ecotec. Email us with questions

 

I cant believe noone has a vid of a cobalt or ion with cams in it

 

Yeah, I wanna hear a cammed Ecotec as well.

Go to a local GM dealer and buy the GM Performance Parts Catalog. The cams are in there as well as several other Ecotec Performance Parts.


Scott

 

I know there are cam blanks but I dont know of any pre grinded performance cams

 

Yes, there is one set of cams from GMPP ready to bolt in. They are in the catalog, but one tomorrow and check out all the other parts too.


Scott

 

How much are they? (the cams)

Also, what other parts for the LSJ are in the book? I'll pick one up but Im not gonna have time until friday to go hang out at my dealer.

 

stage 3 arent road legal and have a rough idle. stage 2 are a little better but still rough at idle. stage 1 is alright especially if you have forced induction. there isnt any tuning packages out for our cars yet so i wouldnt waste the money on a paperweight till one comes out.

 

dont u want a rough idle. when i pull up... i want someone to know i got cams

 

Yea but then again...you got to get it tuned...

rought idel on a cobalt to **** off the mustangs and vettes...ha

bigger cams in our cars than there someday...

stage 1 might be worth it, But i have to see the gains...

 

If i knew the gains on stage 1 i would purchase them. Im thinkin like 10-12hp

 

i dont understand how a rough idle is going to **** off vettes and mustangs? ever had your car almost stall? thats what im talking about, not the noise behind a v8.

 

awwww...alright...i never dealt with cams before but its a must for this car then

im pretty sure i know the rough idle...its those huge delays of hearing the motors cams go around...certain sound i cant explain and motor...not just sound:P