Mark this thread as Unsold
WTB: Supercharger Parts
WTB: Supercharger Parts
Looking for anything needed to supercharge my cavi
Eaton M62 supercharger
lsj manifold
Intake Manifold Endplate- lined up
lsj throttle body
intercooler pump
intercooler bracket
intake manifold bottom mount
lsj stock idler pulley
lsj stock tensioner
Pulley Belt - lined up
3'' pulley - lined up
Alternator Bracket
LSJ Fuel Injector Wire Harness - lined up
LSJ Fuel Injectors (33lbs) - lined up
¾” I.D. Hose
coolant tank
Stock Filler Neck - lined up
and all the necessary bolts for the supercharger,intake manifold, alternator, intercooler etc.
Eaton M62 supercharger
lsj manifold
Intake Manifold Endplate- lined up
lsj throttle body
intercooler pump
intercooler bracket
intake manifold bottom mount
lsj stock idler pulley
lsj stock tensioner
Pulley Belt - lined up
3'' pulley - lined up
Alternator Bracket
LSJ Fuel Injector Wire Harness - lined up
LSJ Fuel Injectors (33lbs) - lined up
¾” I.D. Hose
coolant tank
Stock Filler Neck - lined up
and all the necessary bolts for the supercharger,intake manifold, alternator, intercooler etc.
Last edited by Elite v1; Jun 25, 2009 at 10:26 AM.
I purchased the IC pump for the ford lightning off eBay for 89 dollars new. It is cheap insurance. You'll want to get bigger than the 33lb injectors as they max out pretty quick. You'll want to get something other than the stock heat exchanger as well.
u dont need the lsj map sensors BTW, ur stock ones will do just fine, and you dont need a stgII belt for a 3" pulley, trust me i would know im running a 3.0 on stock LSJ belt fine, 14psi is so much fun, so belt slip at all, lemme know if you want the belt, i have a spare with a rib cut off ready to be shipped...someone else has dibs until the first of the month, but lemme know
u dont need the lsj map sensors BTW, ur stock ones will do just fine, and you dont need a stgII belt for a 3" pulley, trust me i would know im running a 3.0 on stock LSJ belt fine, 14psi is so much fun, so belt slip at all, lemme know if you want the belt, i have a spare with a rib cut off ready to be shipped...someone else has dibs until the first of the month, but lemme know
I might have injectors, harness, pulley, and belt already.
i have a used stock cobalt coolant tank if you interested in it, no pics right now, but its the stock one just like the one u have now, lemme find a pic of what it would look like installed

would look like that one in the pic, he used a stock cobalt tank on the left side

would look like that one in the pic, he used a stock cobalt tank on the left side
Last edited by Jn2; Jun 25, 2009 at 12:56 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post



