Ok, so most of you are already familiar with Niteshades, the spray tint that allows you to tint or "blackout" your taillights, lenses, etc.

For the longest time, after you sprayed the Niteshades you'd have a set of lights that looked smoked/blacked out, but had a matte type finish.

So, now that we have Niteshades CLEAR COAT, you can spray on a protective, glossy type finish that will make it look as if your taillights and or lenses were produced like that from the factory!

Heres a photo of a taillight that had 2 HEAVY coats of Niteshades sprayed on it.



Now the photo below the first is the same taillight but with 3 coats of clear coat sprayed onto it. See how nice and glossy it looks now ?

We have several different options for the Niteshades Clearcoat spray.



First, for those of you who already have Niteshaded lenses, just buy the clearcoat spray by itself (Its $9.99 a can):
http://www.modernperformance.com/nit...at-p-1972.html



For those of you who dont have any Niteshaded items and want to buy the Niteshades and clear coat, we have a package of two cans of Niteshades and one can of Clearcoat, which is enough to do just about the entire cars worth of lenses!
http://www.modernperformance.com/nit...bo-p-1974.html (Package is $29 for two cans of niteshades and one can of clearcoat)

 

very tempting

 

still looks like ****... needs to be cleared out of a spray guy for best results.... or a lot of buffing after this stuff

 

I wish there was a product that was in between. Just a tinge of smoke like instead of it being dark as hell.

 

just put less coats on ^^^