View Full Version : Which Clutch Is Working?


CobaltBurst
06-22-2006, 11:18 AM
Ok this poll is for what clutch you have and if its working or not. Feel free to post your thoughts as well, i plan on getting a fidanza flywheel or spec flywheel with my clutch.

Thanks,
Ryan

Bad06SS
06-22-2006, 11:30 AM
I have the spec 3+ with fidenza flywheel. The clutch works great! No issues! :)

CobaltSS313
06-22-2006, 02:03 PM
i have a clutch masters FX400 6 puck and it works fine.

victory_red_SS
06-22-2006, 02:09 PM
I have both the GM stock clutch and a Clutchmasters FX400 4puck clutch and neither one of them work period. Then again it might have something to do with the lack of an engine in my car.:lol: :lol: :lol: :lol: :lol:

CTCOBALTSSS
06-22-2006, 02:13 PM
I have both the GM stock clutch and a Clutchmasters FX400 4puck clutch and neither one of them work period. Then again it might have something to do with the lack of an engine in my car.:lol: :lol: :lol: :lol: :lol:

Good one. http://justblowme.com/images/smilies/rofl.gif

CobaltBurst
06-22-2006, 05:51 PM
bump

Ljavy17
06-22-2006, 05:54 PM
I have the stock clutch and its holding really really strong.

Ljavy17
06-22-2006, 06:00 PM
then again, im the bestest driver in the whole wide world. so yea.

CobaltBurst
06-22-2006, 06:26 PM
yea i did a burn out in mine and screwed it..... it was fine... but its a ticking time bomb with an intense stage kit...

SilverSS/SC
06-23-2006, 04:56 AM
My spec 2+ and fidenza flywheel are doing fine . There are a couple annoyances , but no mechanical hiccups as of yet . Its been in for a few months now .

Eddie
06-23-2006, 05:00 AM
clutch master is good, but i'd wait for ACT, dont get spec.

CobaltBurst
06-23-2006, 07:35 AM
thanks for all of the input.

Sharkey
11-19-2007, 10:14 PM
i see one site has bully clutches for the balt, yet bully doesnt list then on their site. anyone got one???

i had a bully stage 2 in my last car, i thought it was the best thing since sliced bread. full iron faced disk with an improved pressure plate. never chattered, not much higher pedal effort, but with a v6, launching at 5000rpm on drag radials, 2.0 60' times, it never complained. a buddy had the same setup, was running 1.8 60' on slicks, never had an issue

hg_5
11-19-2007, 11:47 PM
I have had a bully stage 3 clutch sitting on my closet for almost a year....i got my stock one rebuilded in Mexico LOL and it just wont give out on me hahaha,, i beat hard on it daily

CobaltVenomSS
11-19-2007, 11:47 PM
I have the spec 3+ with fidenza flywheel. The clutch works great! No issues! :)

x2!!!!!!!

dstinsman56
12-01-2007, 10:33 AM
I have a stage 4 bully clutch but doesnt engage right ever since it was put in. Works fine in the morning and as the day goes on it is harder and harder to put into gear without pumping it.

poppagun
12-01-2007, 10:36 AM
exedy best clutch period.

07MetallicSC
12-01-2007, 11:25 AM
Im looking into an exedy clutch/flywheel...

megaman311
12-01-2007, 03:22 PM
sounds like an air leak somewhere.

badboylb32
12-01-2007, 09:26 PM
exedy is awsome but people have been breaking trannys with it, including me...

TurboTechRacing
12-01-2007, 11:08 PM
Spec Stage 3+ or the Exedy Hyper single and you wont have a problem, we have yet to hear about 1 on either kit.

widebody_balt_ss
12-01-2007, 11:37 PM
spec stage 3 + ftw, i love the spec 3+ with spec lightweight flywheel.

2K5SS/SC?
12-02-2007, 12:26 AM
I had the first 3 versions of the FX300 Clutchmasters as I was a test bed, and the last version kicked ass. In fact my I sold it to xskier874 with a new disk and he is now rocking it without any issues.

I will say that my Exedy however is the best damn clutch of all. Phenominal design, superior billet pressure plate, 6 puck sprung disk, lightweight cromoly flywheel doesn't get any better in my book. Works great all the time and every time! :twothumbs

BlackSS/SC
12-02-2007, 01:45 AM
Exedy!!!!

Kaisoboy
12-02-2007, 01:48 AM
spec stage 3 6 puck and spec flywheel. Works great.