Guys I cannot get power to my guages should i connect white and green harness to a power supply if so how should i do this or should the interceptors have power when the grey wire is connected.
Thanks

bump need help asap

 

no the white and green wires are for your analog inputs or whatever its called,

the red needs a 12v swtiched power cource and the OBDII connector needs to be in, make sure its all the way in and the gauge has power, and if all thats right contact aeroforce, theyll help you out,

 

You only hook the red wire to a switched power source, then plug it in the OBD II

 

Are you talking about the red wire in the white green and red set?

 

yes.....

 

Yes X2

 

yes thats all you hook up..i hooked the power up to my sunroof fuse

 

i'll let you know how it turns out thanks

succes they are working I will post some pics tomorrow thanks everyone

Hey guys just installed my guages one of them will let me adjust the shift light the other will not both data rates are at 1 but one of the guages when I click the right button to select shift light it goes back to the main menu.